BLADE SHOW ’09 – Show us what you got; Please!

stephanfowler said:
Here is what I have so far

11 1/4" W2 Blade
Maple Burl Handle
SS double guard and buttcap

maplebowie.jpg
Click to expand...

Beautiful!
 
Two guys from Georgia?
Forget about the two. One of them will not be showing up and the other will take 'em both. :D
 
I finally finished my fifth JS Test Knife about a week ago!

This is the first Spear Point blade I've made. The 9" blade is forged from 5160. The handle is of Amber Dyed Sambar Stag. (this was also the first time I've used stag on a Bowie handle) The fittings are German Silver with Rope Pattern File work. The blade has a 1500 grit finish on it. This was the first time I've done a finish like this on a blade and I like it so much that I think I'll have to do it like this a lot more.

I would like to thank my brother Caleb for the great picture!

3497158803_401d4d57dd_b.jpg


3497158803_401d4d57dd.jpg
 
Last edited:
Gents Wharncliff Carver

Overall Size Open: 6-1/4"
Overall Size Closed: 3-3/4"
Blade Length: 2-3/4"
Blade Steel: D2
Liners and Bolsters: 416 stainless
Hidden Pappy Pins for lanyards with sterling silver, leather and walrus ivory
Exhibition Grade mammoth Ivory in Green and also Black Bark

attachment.php


Hope to see you at the Blade Show
Table 9-A

Thanks

Tim




 

Attachments

  • DSC_0054.jpg
    DSC_0054.jpg
    79.3 KB · Views: 1,373
I'll have this Quillion Dagger on my table (23-P) to look at if you like. Thanks, Lin
3460410617_3ed5b96197_o.jpg
 
Here's a couple more JR Cook will be bringing to Atlanta.

Bayou hunter/ Drop point.
This hunter has a 5" blade with rope file work on the spine. The fittings are stainless steel. The pins are domed stainless steel. Great stag:
blade20show20Bayou20hunter.jpg


Gold Rush Personal Carry knife:
5-1/8" selective etched Damascus blade. The fittings are stainless steel and the handle bolts are domed stainless steel. Another nice stag grip. The knife is 9-1/2" overall:
Blade20show20Gold20Rush20Boot20knif.jpg
 
Here's a beautiful "Matched Set" of Hunters Jerry is finishing up. Kind of shows the progression of the engraving/inlay. The side by side photos are also interesting in that they depict the differences between Jerry's Sendero and Gamemaster hunter models. The blades are a laddered "W" pattern and just a tad under 5". The handles are of course amber sambar stag. Scroll engraving with 24k gold inlay.
Chuck Ward will shoot these after Jerry completes the finishing touches.

bladeshow-09-sendero2.jpg

bladeshow-09-GM.jpg
 
A few new ones and a few of the others re-shot with my camera setup a little better

I hadn't planned to bring any of these smaller blades but I had several requests so I made some

walnutspringermtn.jpg


blackstnmtn.jpg


greenstnmtn.jpg


brownstnmtn.jpg



maplebowie2.jpg



stagbowie2.jpg



ironwoodrecurve2.jpg
 
I'll have this Compact Hunter with me at Blade. It's a 3 inch carbon steel blade with an OAL of 7 1/8 or so. The fittings are Stainless and the handle is Amber Stag. Thanks, Lin
3521784315_ef3918b4c2_o.jpg
 
Burt Foster said:
Here's another knife for the show. This is my first subhilt, and it was challenging but fun to build. In order to get everything to flow like this, the knife has to be worked as a unit at times and then partially disassembled and worked in sections at other times. Kinda fun once you get in the groove.

Blade is 416 stainless over 52100 laminate, double ground and very sharp everywhere but the ricasso. The fittings are firestorm damascus with polished stainless spacers and a desert ironwood handle with a carved butt. The sheath is tooled with a chevron style basketweave pattern. The blade is 7.25" and the knfie is 12.25" overall.

fighter022-small.jpg
Click to expand...

Stellar in every way. I mean thats a real show stopper. Out of the box, Burt.
 
You must log in or register to reply here.
Back
Top