Fiddleback Friday 2/7/14

[willic]

Andy, your wood choices are freakin' AMAZING! Outrageous, yet tasteful! WOW!

-Will

 

[essublime]

Gotta ask, what's the twist in "Tuxedo with a twist"?

Good looking batch. Amazing looking wood in here. Thanks Andy and crew!

Looks like there is an extra pin on your tuxedo thurin.

Great batch Andy. That maroon Kephart is bada$$.
I love Fridays in more ways than one; early one today...

 

[Karl5]

I'll take this one please


2014 0207 012 – Bushfinger, Brownheart over natural canvas with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $325

 

[a2vg1095]

2014 0207 022 – Big Sneaky, Tuxedo with a twist, SFT Tang, 5/32” thick 3D Spalted 01 steel - $300
I'll take it please....

 

[thurin]

Looks like there is an extra pin on your tuxedo thurin.

I thought that too, but noticed the Big Sneaky Tuxedo with a twist only had the standard 5 pins. Doesn't matter too much, I still want it.

 

[Brummie]

I think tuxedo with a twist has a lime liner.

Glad to see the Big Sneaky selling - I think it's a great design. I might have to buy a stainless one to go with my O1, if one is ever made.

 

[a2vg1095]

2014 0207 005 – Hiking Buddy, Tuxedo, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
I'll take it please...

 

[dopenerd]

Can I get the green black kephart?

 

[essublime]

I think tuxedo with a twist has a lime liner.

That's what I initially thought but couldn't tell for sure. The lime green pinstripe would make more sense, hence the "twist"

 

[NoFair]

Osage Woodsman is a stunner! Good thing someone bought it

 

[Crano]

Can I have 2014 0207 018 plesse Andy

 

[Crano]

Can I have 2014 0207 018 please Andy

Andy I have sent you an email regarding last week's Bushraptor.
Cheers Mick.

 

[McVeyMac]

This one was early today. Good thing too as I was about to pull the trigger on the HB that a2vg1095 just got. I just opened two knives up from Andy last night coming from last Friday.

Quick question for you all, I am looking to get some pocket sheaths made. I got an EDCII and a Sneaky Pete last week that I want to make them for. I fully intend to get leather, tools, etc. and make my own, but these knives are just too beautiful not to carry. I might want to just by one, then make the rest. I have some small production fixed blade knives that I am going to do this for as well. As an FYI, I have some KSF made pocket sheaths, but the height of these, and other blades that I own will not fit. Can anyone suggest a good sheath maker that knows these knives?

 

[Crano]

Can I also have the Recluse 2014 0207 008 thanks Andy.
Mick

 

[Bamboo]

I am jumping in for Andy right now as we are prepping to get on the road for the GA Knife Guild meeting.

Andy,
i would like the 2014 0207 024 – Woodsman, Osage Orange on black g10 with an Orange g10 pinstripe, SFT tang, Convex on 5/32” thick 3D Spalted 01 steel - $330 if it is available. Thanks, GM

You got the Osage Woodsman Gumaropa! Thank you.

2014 0207 025 – Woodsman, Stabilized and dyed curly and quartersawn Red Oak over natural canvas with a blue g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $350

please

Choila, the other Woodsman is yours. You also got the Bone Bushraptor. Thank you.

I'd love to have the 2014 0207 023 – Duke, Stabilized and dyed curly and quartersawn Red Oak over black g10 with a white g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D Spalted 01 steel - $350

The Duke is yours Bill! Thanks.

Can I please have:

2014 0207 004 – Hiking Buddy, Model Standard little stubby fatt tool handle, Osage Orange on black g10 with a lime green g10 pinstripe, Tapered tang (wisper thin), Convex on 1/8” thick Fiddltextured 01 steel - $270

You got it Will. Also have you down for the bolstered Arete, nice knife that one.

Hello Mr. Andy Might I have???
2014 0207 016 – Big Paw Bushcraft, Stabilized and dyed curly and quartersawn Red Oak over black canvas with white and blue g10 pinstripes, SFT Tang, Convex on 5/32” thick 3D spalted 01 steel - $275

You got it Kevroo! Thank you!!

Yes, I've been waiting for a while for one of these! Will gladly take the 2014 0207 015 – Terassaur, Natural Canvas on black g10 with an orange g10 pinstripe, SFT Tang, SCANDI on 1/8” thick 3D Spalted 01 steel - $225

You got the Terrasaur Velosa, thank you!

Thank you for the Big Paw

Andy, I'll take:

2014 0207 017 – Big Paw Bushcraft, Tuxedo with a twist, SFT Tang, Convex on 1/8” thick 3D spalted 01 steel - $225

She's all yours Thurin!

2014 0207 007 – Bushraptor, BONE white linen on black g10 with a lime green g10 pinstripe, SFT tang, Convex on 1/8” thick 3D Spalted 01 steel - $240
please

As above, she's all yours. Thanks again.

2014 0207 006 – Hiking Buddy, Cofeebag Burlap from Shadetree Phenolics, Always grippy/never slippy, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $240

I will take this one if available!
Tim

Thank you Marble, you got the coffee HB!

Could I get the runt please Andy Thanks Jim

Jmac the Runt is yours. Thank you!

2014 0207 019 – Big Paw Bushcraft, Maroon linen on natural canvas with a white g10 pinstripe, SFT Tang, Convex on 5/32” thick 3D spalted 01 steel - 265
please

3rd knife this week! Thanks Choila. I believe we are also sitting on a knife of yours here from last week.

Andy, Can I also please have:

2014 0207 014 – Arete, Whoa, Black canvas micarta bolsters with stabilized and dyed Lacewood, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $315

Yup, you got it! Thanks.

I will take the maroon Karda. Thanks Andy!

She's all yours! Thank you.

2014 0207 024

Sorry Immiami, that knife was claimed earlier.

I'll take this one please


2014 0207 012 – Bushfinger, Brownheart over natural canvas with an orange g10 pinstripe, SFT Tang, Convex on 1/8” thick Fiddltextured CPM 154 steel - $325

Thanks Karl, the brownheart BF is yours. That is a new wood for us. We found a piece at the lumber yard recently and thought it would pretty sharp as knife handles.

2014 0207 022 – Big Sneaky, Tuxedo with a twist, SFT Tang, 5/32” thick 3D Spalted 01 steel - $300
I'll take it please....

2014 0207 005 – Hiking Buddy, Tuxedo, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - $200
I'll take it please...

You got 'em both a2! Thank you!!

Can I get the green black kephart?

You got the Kephart DN! Nice choice.

Andy I have sent you an email regarding last week's Bushraptor.
Cheers Mick.

Can I also have the Recluse 2014 0207 008 thanks Andy.
Mick

Hi Mick. We got the email and will get back to you. And yes, you got the Bone Recluse as well as the Black Palm Big Paw. Thank you!!

 

[essublime]

This one was early today. Good thing too as I was about to pull the trigger on the HB that a2vg1095 just got. I just opened two knives up from Andy last night coming from last Friday.

Quick question for you all, I am looking to get some pocket sheaths made. I got an EDCII and a Sneaky Pete last week that I want to make them for. I fully intend to get leather, tools, etc. and make my own, but these knives are just too beautiful not to carry. I might want to just by one, then make the rest. I have some small production fixed blade knives that I am going to do this for as well. As an FYI, I have some KSF made pocket sheaths, but the height of these, and other blades that I own will not fit. Can anyone suggest a good sheath maker that knows these knives?

I love me some Rick Lowe pocket sheaths with clips.

Rick can be contacted at:
ruger315@charter.net

 

[bear71]

2014 0207 010 – Kephart, Maroon linen with nat can bolsters and liners, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - 305

I'll take it please1

 

[xxwjtxx]

2014 0207 010 – Kephart, Maroon linen with nat can bolsters and liners, SFT Tang, Convex on 1/8” thick 3D Spalted 01 steel - 305

I'll take it please1

nice pick; if I didn't already have a kephart, I would've been all over this one!

 

[thurin]

This one was early today. Good thing too as I was about to pull the trigger on the HB that a2vg1095 just got. I just opened two knives up from Andy last night coming from last Friday.

Quick question for you all, I am looking to get some pocket sheaths made. I got an EDCII and a Sneaky Pete last week that I want to make them for. I fully intend to get leather, tools, etc. and make my own, but these knives are just too beautiful not to carry. I might want to just by one, then make the rest. I have some small production fixed blade knives that I am going to do this for as well. As an FYI, I have some KSF made pocket sheaths, but the height of these, and other blades that I own will not fit. Can anyone suggest a good sheath maker that knows these knives?

McVeyMac, Congrats on the Fiddlebacks!

For some ideas on sheaths, take a look at this thread: http://www.bladeforums.com/forums/showthread.php/1126544-Show-off-your-Fiddlebacks-and-Leather

 

[bear71]

nice pick; if I didn't already have a kephart, I would've been all over this one!

Thanks, this'll be my 4th! But the configuration isn't one you see everyday and it'll compliment a couple of my others. Broke for lunch just in time!