I got my Allen Blade knife

Keith, I think you're right. Lot's of our strong beliefs are things about which we can accept some humor, but when some of your ancestors were murdered because of their religious beliefs, you get a little sensitive about it -- and I am -- and I make no apology about it. That being said, I think Allan could have substituted just about any organization, race, gender, etc. in his post above and it would have been in poor taste. I just happen to have been the one with the ox who was gored so I was a little sensitive. Oh well, back to knives.

I think Allan makes great knives. I've had one on order for over three years. If he makes it I'll buy it. If not, there are plenty of other makers who will take my money.

Bruce
 
Hey,

Kinson YEE, or YEEDUDE as he is known on here, has recieved his Knife that i did get caught up on finally with.

the USPS tracking number is 030 1290 0000 187 6036 if anyone wants to verify it also themselves. He emailed that he Got the Knife also and i have that email if anyone doubts it.

Im trying my best to get the last few people caught up, WIn herger got one of his i have a couple more going to him , and Next is Getting JOE CHEN caught up and done .

Im trying my best to get this all caught up and done, and i only have a couple others other than those mentioned to go.

I dont need any, THATA BOY`s, or WAY TO GO ALLAN`s, i brought these problems on myself 3 yrs ago , so its my fault, i dont need congratualtions on doing things i shouldnt have sqrewed upon in the FIrst place.

Thanks,, ALLAN
 
Mr. Blade,
No matter what, it's good for me to hear Yeedude got his knife.
I'm sure you are trying to do the right thing, I respect it.

Joe
 
yes they sure are commrick, right after Joe Chen , your next then i got two more people and i am Done and caught up.

allan
 
Hey YEEDUDE,
How about a post about that knife? It would be interesting to see how you feel about it after all that time. I would not expect you to be praising Allan but a little closure would be nice. (Dang, if I have been listening to Dr Phil too much!)

I have a Osage handled Custom Pack Pal on order since the 1st of the month and went ahead and Paypaled. I have faith that early next month it will arrive. I will post again when it arrives.

Yes, we all need forgiveness, please go see the Passion.
Peter :cool:
 
No problem about forgiveness after I receive all of my paid knives.
Actually I don't hate him at all. Just feel SAD.

Until now NONE for me for more than 37 months.

New order can be filled in month, old orders can wait longer and longer.

No good for me but good for you agreatscot.

Joe
 
Damn Joe, Allan has told me over and over that he was going to take care of your situation right away. He always makes it seem that people are unfairly piling on him and that they should geet of his back. After all, he is trying to get caught up with his old orders, isn't he? I wonder what he thinks right away means? Whenever he is darn well good and ready?

Allan, get of your ass and get Joe his knives. Quit making excuses, they are meaningless. Thirty seven months is three years too long for this to have gone on. You want your rep back? This is a pitiful way to go about remaking a name for yourself. It just tells us that you continue to do business as usual.
 
Damn Joe, Allan has told me over and over that he was going to take care of your situation right away.
Click to expand...

Damn Keith, you actually seem surprised that Joe has not received his knives. Surely you dont put any stock in Allens words do you?
 
Richard said:
Damn Keith, you actually seem surprised that Joe has not received his knives. Surely you dont put any stock in Allens words do you?
Click to expand...

Not really, I guess I am just an eternal optimist. :rolleyes:
 
Keith,
Thanks for the links. I don't even know he has time for new web site and self-promoting at other forums but can't delivery my knives (even one) for that long.

And, he doesn't delivery my knives but use my picture at his new web site although the picture had been modified but check the picture of chipmunk at his page and compare that one to my photo at this link carefully.

His page http://www.bladecutlery.com/bladecutlery_005.htm

My picture : http://knifenut.idv.tw/forumknife/2000/2chipmunks_back.jpg

Here my friend helps to do some image-processing.
In this picture, the right one was shown at the new "bladecutlery site",
the left is my picture with rotated angle.
101824-temp.jpg


What happen to this world? Where is the honor and respect? :(

Joe
 
this is the very first time that I try to write in english in public, that language is not my native at all, all those years passed I was stuck on the knifeforum in Taiwan, and I've to say, Darn you, allen Fxxx Blade.

I believe, that everyone who participated this discussion should know about the stupid long history of the chipmunks, they were meant to be the forum knives of Taiwan's Knifenut Forum 3 years ago, and now that all became Joe's problem, Allen'd got the money, Joe got nothing in return. so did All Taiwanese Knifenuts who be looking for the Darn knives.

I don't know if you believe in souls or afterworld, for the previous, it should be crying that the souls belongs to the blades that Allen built. For the following, You should be burn in the Inferior ever and ever, lying SOB Allen Fxxxxxx Blade
 
BTW, I apologized for those "parabla malas", I really don't know how to describe a monster who looks like a manking but with mind of DOG, forgive me again, I don't mean to humiliate the friendly animal, Anyone who can help me to find a right substitute for the SOB and Allen FXXXX Blade?
 
julimarc is one of my knife friends in Taiwan.
We Taiwan knifenuts put orders together long time ago to that maker and stepped into trouble until now.

Although I paid most of my knife friends back for their "Allen Blade's orders" from my own pocket long time ago because the maker didn't keep his promise countless.
But this is the first time I asked them to post their opinion here.

Maybe our English is not good enough to describe our upset and frustration for this unbelievable situation.
I do hope you guys please try to understand what we like to say and be careful don't get into the same trouble like us.

Thank you,
Joe
 
What a shame, Allen. :( :(
You should try more and still more to regain the respect. Time will tell and we will see.
 
This is my first post here, becuse I can't tolerate the situation anymore.
I am one of Joe's friends in Taiwan.
And I am also one of the people that STILL waiting for my chipmunk.
So I think I can say something here, and I will try my best to put my respect on him.

In 2000, when Joe noticed the talonite chipmunk and this maker that "provide good knives in good price", I was the first one that followed him.
After that, these knives became our annual knif of that year(yes, 2000), with an order of 20, two of them(#2 and #19) were mine.
I got my #2 in August 13th 2000, I really love it.
We had some pretty positive reviews and discussions about the knives and the maker.
I really like this guy at that time.
But things were looking down since that.
No knives, all lies.
We got 8 chipmunks until now, less than half of we had ordered.

It's true that this guy make good knives in good price.
But I really can't believe in his reputation less.
It's really sucks!

Finally I want to say PLEASE, folks, consider carefully, before get yourself into a big trouble.

Thanks for your reading, and sorry for my poor English.
 
In Taiwan it costs knifenuts more bucks to buy knives from the States, because of the high tariff and delivery cost. But we are still eager to obtain the knives made in U.S.A. due to the high quality and reliability. Apparently, Allen Blade had destroyed our trust already. After the long-time waiting, Joe, instead of Allen, reimbursed us money and took the tribulation alone. It’s not fair to him. So, Allen, please let your conscience sober up and take your responsibility as quickly as you can. :mad:

hankhsiao
 
You must log in or register to reply here.
Back
Top