Discussion in 'General Knife Discussion' started by JParanee, Jan 11, 2019.

  1. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006
    I have never ever been a Karambit fan

    In fact I’ve been quite vocal on here about how much I don’t care for them

    I will admit I’ve always liked their look but I was not sold on the utility or practicality of the design

    How good could a gardening tool turned defense weapon be :)

    I’ve almost purchased some different models to try out over the years but always backed away

    When I saw the Caswell Morphing Karambit I was really tempted

    I should have bought one at the $450 Kickstarter price but alas I didn’t

    When I saw that CRKT was coming out with the Caswell design and I could preorder one at one dealer for $186 and I always have points I did

    So I guess I’m gonna see if I like KARAMBITS and this weird cool design

    I like the d2 blade and I really dig any folding type knife that can’t accidentally close

    Anyone else order one of these ?




    Last edited: Mar 23, 2019
    Beastchopper and Cro like this.
  2. Lapedog


    Dec 7, 2016
    Dude! You should have waited, and I’ll give you two reasons why:

    1. This is a fairly complex folding knife. Might have wanted to give CRKT a chance to fine tune the way they build these.

    2. I heard in one interview with CRKT representatives that they intend to release this design with other blade shapes. Imagine this sucker with a wharncliffe on the end or (not gunna happen) a pikal version.

    Still I hope you get alot of joy out of the knife! Let us know how you like it.
    NG VI, shovelhead69 and L.H.S like this.
  3. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006

    It’s five pieces so hopefully they can get it right :)

    Is imagine it’s pretty much a replica of the Caswell produced version

    If they make a Wharnie I couldn’t resist
    shovelhead69 and bikerector like this.
  4. Lapedog


    Dec 7, 2016
    CRKT is only making five of these?
  5. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006

    It’s five parts my friend
  6. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006
  7. Lapedog


    Dec 7, 2016
    Ohhh ok I get it.

    Hopefully that isn’t 4 parts too many for CRKT to handle.
    Rival1314, PinkmagicK, NG VI and 12 others like this.
  8. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006

    I hope so too :)
  9. SpySmasher

    SpySmasher Lead Guitar

    Sep 1, 2016
    I don't know if anyone's preordered it but we've been talking about it. There are a couple of threads here from the last few months.
  10. rover


    Jul 9, 2004
    Love the mechanism. The karambit? Not a big fan. I've owned a bunch and done some training but not for me. They are fun though and that mechanism looks trick!
    User27 likes this.
  11. sgt1372

    sgt1372 Platinum Member Platinum Member

    Oct 16, 2018
    Ok, I'll bite.

    I've always found fixed blade karambits simpler and more effective but the Caswell (CRKT Provoke) looks way more effective for deployment than the Spyderco Karahawk (or any other wave supplemented folding karambit).

    Where can I get one?

    Searching . . . BHQ says they should be available on 1/18/2019. Not that long to wait. :)
    Last edited: Jan 12, 2019
  12. JParanee

    JParanee Gold Member Gold Member

    Dec 23, 2006

    Retailers are taking preorders

    I ordered mine on amazon
  13. sgt1372

    sgt1372 Platinum Member Platinum Member

    Oct 16, 2018
    Don't like pre-ordering.

    Just tried that w/the Spyderco Tropen and it didn't work out the way I liked. I don't have to be the 1st on the block w/one.

    I've got a Spyderco Karahawk, as well as some other reverse blade knives like the Spyderco P'Kal & Reverse (fixed) and the ZT0750, that can keep me busy in the meantime.

    I'll get a CRKT Provoke sooner or later. The 1st place I see that has it "in stock" at the best price w/the quickest delivery time will get my order. ;)
    Last edited: Jan 12, 2019
  14. dkb45


    Dec 16, 2012
    I hope it does well, but it's a definite pass for me. I don't trust CRKT build quality, $200 is crazy high for foreign produced D2, and the blade stock is absurdly thick (.190").
    NG VI, Mo2, skyblue and 2 others like this.
  15. sgt1372

    sgt1372 Platinum Member Platinum Member

    Oct 16, 2018
    Well, FWIW, I currently have 26 CRKT folders and haven't had an issue w/the build quality of any of them, despite the fact that (for the most part) they only cost between $40-80 (out of pocket), and for $200 MSRP w/a lifetime guarantee, I would expect the Provoke to be far better made than those.

    Besides, I collect "fighting" knives and I'm a sucker for a unique design and from what I saw here, it definitely has place in my collection.
  16. b00n


    Dec 15, 2016
    I might get one for the novelty of the mechanism but I'll definitely wait until a bunch have been delivered.
    NG VI and unwisefool like this.
  17. kickert


    Jan 1, 2019
    It really is a fascinating mechanism. I have exactly zero uses for it, but it would be hella fun to play with.
  18. bobobama


    Jan 15, 2017
    Have to agree with JP. I'm not crazy about Karambits but this one is pretty fascinating. Catch a video if you can.

    BTW, glad to see there wasn't too much CRKT bashing in this thread;).
  19. b00n


    Dec 15, 2016
    I think unlike a lot of other actually bad companies, people (at least I) bash CRKT because we actually like them, or at least their portfolio of designs. So it doesn't come from a place of hate but more frustration, because I would really like to buy more CRKT Knives if they just had better materials and F&F. Imagine CRKT contracting out their designs to WE, elevate them to a slightly higher price point (80-130$) and you'd have a bunch of really good options.
  20. dirc


    Jan 31, 2018
    speaking of CRKT, one of their recent designs that has me interested is the 6870 Steigerwalt Incendor

    I really don't care for 8cr13mov, but as far as budget steel goes, it's not bad when the heat treat is done well. But, they seem to have messed with the g10 handle to cut out a spot for the thumbstud, I expect I'll find that annoying. I have not held one yet, so I don't know, but am curious if any of you have. Is it a ruined design or does it work out?

    thanks, (no intention to go sideways on this thread, but general comments about the company and designs came up so I thought it should be okay)

Share This Page