I like Big Snarks and I cannot lie

Status
Not open for further replies.
James when I'm of age I guess I'll have to try some.
The Airforce thinks I have 20/20 when I know I have bad astigmatism in both eyes LOL.
 
James when I'm of age I guess I'll have to try some.

I don't know if they'll have more this year or not. It's not like they brew it themselves, it's made by another brewery and they just have custom labels put on it... all sorts of companies do promo stuff like that. Thinking about having some done up myself actually... but you have to order quite a bit to make it worthwhile...
 
Cleaned out my PC, and it's still shutting down. Oh well.
 
Cleaned out my PC, and it's still shutting down. Oh well.

Could you give me any other symptoms?
Can you get into the BIOS?
(I work on servers all day and client pcs.)

Verify all cable connections for the 4/8pin EPS is plugged in and the 24pin is plugged in to?
Verify all ram is seated properly.
Verify that you PCI cards are in properly.
 
Let me apologize in advance... Once again im sober, but again its in the middle of the day :D

I want to see you cut that giant bottle of fabric softener in the back ground. ;)
.

This is my first attempt at a bottle like this. But hey you asked for it :D

[video=youtube;BYJsbrHX_Ps]https://www.youtube.com/watch?v=BYJsbrHX_Ps&feature=youtu.be[/video]
 
Let me apologize in advance... Once again im sober, but again its in the middle of the day :D



This is my first attempt at a bottle like this. But hey you asked for it :D

[video=youtube;BYJsbrHX_Ps]https://www.youtube.com/watch?v=BYJsbrHX_Ps&feature=youtu.be[/video]

Oh man I wish I could see this at work, I can only imagine how funny this is.
 
Oh man I wish I could see this at work, I can only imagine how funny this is.

The funny part is when the wife comes home and there is water covering the basement floor......

But this is stuff anyone can try at home, you have a pretty nice edge on your 9, so give it a try bro!!!

One thing that helped me learn to cut through bottles was "aiming" right PAST the bottle, this keeps my momentum going until i have cleared the bottle/s.

In a case like this the bottle was 5" x 8" wide and a lot thicker plastic than a water bottle so i had to keep my form correct using more force through the entire cut.
 
Last edited:
James that picture you posted im guessing is one of those 3d pictures.... I just get a headache trying to see what it is though.
 
Could you give me any other symptoms?
Can you get into the BIOS?
(I work on servers all day and client pcs.)

Verify all cable connections for the 4/8pin EPS is plugged in and the 24pin is plugged in to?
Verify all ram is seated properly.
Verify that you PCI cards are in properly.
Really aren't any symptoms, it just shuts down. Actually, it reboots. I'm wondering about he graphics card. Here's the temps at boot up:

sshot-1.png


And just after a few seconds watching a video, it's like this:

sshot-3.png
 
Take out the card and run a check Disk.
Reinstall all drivers for your graphics card.
 
The funny part is when the wife comes home and there is water covering the basement floor......

But this is stuff anyone can try at home, you have a pretty nice edge on your 9, so give it a try bro!!!

One thing that helped me learn to cut through bottles was "aiming" right PAST the bottle, this keeps my momentum going until i have cleared the bottle/s.

In a case like this the bottle was 5" x 8" wide and a lot thicker plastic than a water bottle so i had to keep my form correct using more force through the entire cut.

I'll try it have to try it out and try recording it later.
The things I do for you guys :P
 
Take out the card and run a check Disk.
Reinstall all drivers for your graphics card.
Are we still speaking English, haha? I know nothing about computers. I'm sure there's several tuts out there though.
 
Are we still speaking English, haha? I know nothing about computers. I'm sure there's several tuts out there though.

Haha do you have a graphics card in your pc?
If so remove it and run off of the on board video(HDMI/VGA/DVI) off the back plate(I/O ports) on the motherboard.
Drivers you can look up online to help you.
 
James that picture you posted im guessing is one of those 3d pictures.... I just get a headache trying to see what it is though.

Not 3D, just made of different colored dots that spell something out. You don't want to know :D
 
I could read it plain as day. But then I'm like James in the color world. When I joined the Navy back in college, during my physical I didn't miss a single page out of 8 books they ran me through. They just couldn't believe I could read them all. Also had all 32 teeth as my Wisdom teeth came in just fine with no issue and the dentists took pictures. Was still wearing glasses due to astigmatism, but the color part was and is great.

Don't ask me what the NAME of all those different colors are. Give me 20 shades of some color and I can line'm up in color depth order but they're all still just "pink" or "blue" or "red" .....
 
I don't know if they'll have more this year or not. It's not like they brew it themselves, it's made by another brewery and they just have custom labels put on it... all sorts of companies do promo stuff like that. Thinking about having some done up myself actually... but you have to order quite a bit to make it worthwhile...

I had some of his first batch.... it left something to be desired really but the theme was cute.

 
Status
Not open for further replies.
Back
Top