Military grade fixed blade

As an Army Cadet i usually carry 3 knives on the field, one folder one fixed blade and one multitool.

Get good leatherman multitool

A fallkniven or ESEE fixed Blade,

and if you can a ZT 200\301, Emerson CQC 13\10 or a good old spyderco. You cant go wrong either.
 
From what I understand the most useful piece of equipment in the army (other than rifle, pack and boots) is a good multi-tool.

I recommend the SOG Powerlock S60. :thumbup:
 
As an Infantryman who has been deployed on more then a few occasions to the middle east, I would say a good multi tool and an ESEE 4 would do him well. There is no need for a rambo sized knife. a 4-6 inch knife is about as big as he should go. Another good knife I would recommend is the BRKT STS 5 I do not own one, but have heard good things from friends who do.
 
A good multi-tool is essential, and will probably get the most use. Leatherman, Victorinox and SOG all put out good tools.
 
Small and light is probably the best choice. +1 on the Fallkniven F1.

Spyderco Aqua Salt with a serrated edge would also be a good option. The fact that it can’t rust is a real plus.

If you simply want to give a cool, military looking knife, the Next Generation KA-BAR or the USMC KA-BAR will fit the bill.

I agree with other posters, a multitool will be very useful.
 
Last edited:
Hi
As part of the canadian military, I've been deployed twice in Khandahar in the last 2 years. In that time I have not needed anything more than a spyderco Endura 4 combo edge (because sometimes you NEED serrations) and the do it all Leatherman Wave that has been far more usefull than any fixed blade I could think of. You can pry, grip, srew and unscrew, it has a saw and prettry much every thing else you would need there. Plus the blade are on the outside of the tool so you don't have to open it first. Just my .02 cents.
 
Esse 4, Scrap Yard S5 both plenty tough, light and you won't cry if they get lost or stolen...great sheath on the esee

Even smaller, Swamp Rat Bandicoot if you can find one- mean little knife...
 
mk.ultra said:
Do troops deployed to Iraq actually use $500 folders???? You'd think they'd want something strong yet disposable, like a Rat-1 or something...
Click to expand...

Volk said:
Actually I was talking about fixed blades, and I was saying what would be considered hot. And to think of it, I bet they do use their folders. Hot isn't something everyone goes for, some have budgets.

Now you might need something disposable if you were doing covert work, but when you use your knife as a tool for just about everything, then you'd really wish it was a $500 knife. You don't need to spill that much but $250-350 will get you something that will do everything you need for years.

What I said was, Striders are hot, and I would carry a Busse. How much stock you want to put into it, is up to you. Look into both knife companies and what you are going to use the knife for, then decide for yourself. Especialy considering the fact that there are other makers like CRK, ER, MV, and such that specialize in combat oriented knifes. In the end I'm just deciding what I'm going to get.
Click to expand...


What you guys seem to be forgetting is that Strider knocks something like 50% off of knives for the military boys. So if you're in, their fixed blades can actually be had for about 200 clams. Not half bad for the monsters they are. In addition, Strider's warranty is amazing, but for the military, it's even better. They take care of the military guys like they're family. So yeah, they are pretty popular for a high end knife in the armed forces.
 
Esse or something from the Entrek line if you prefer ss(440C). Both tough as hell with great warranty and customer service. Both can be had for around $100+/-
 
Apebrains said:
What you guys seem to be forgetting is that Strider knocks something like 50% off of knives for the military boys. So if you're in, their fixed blades can actually be had for about 200 clams. Not half bad for the monsters they are. In addition, Strider's warranty is amazing, but for the military, it's even better. They take care of the military guys like they're family. So yeah, they are pretty popular for a high end knife in the armed forces.
Click to expand...

i called and asked strider knives it's 20%. just letting you know
respectfully, blueprint
 
had a gerber multi tool and a spyderco millie while i was in the marines and they held up well
the millie is light and fast and the gerber was a big help

if you need bigger chopperthing you have an Etool that you will have to have on you anyhow (no its not sexy but if you bust it its a cheaf replacement) bigger then that and there will be a hummer or other transport that will have picax or hatchet

if iwas adding anything that i would have carried it would be 5-6 inch spear point knife in CPM3V i have made a few and call them OB knives
 
The Kabar is generally considered THE GI issue fighting and combat utility knife, and has been that way since WWII. There's a reason for this-Kabar's 1095 CroVan steel is ideal for rough use, their heat treat and fit and finish are meticulous and the blade shape and handle lend it to cover a multitude of tasks. When I enlisted in the Air Force I picked a few up. All of them are jut a sharp as the day I bought them and have NEVER had a gripe about them. Plus, they're relatively inexpensive, so if it gets lost or destroyed they're replaceable. The John Ek line has long been considered another exceptional combat utility and fighting knife, though they run a bit more as they have been discontinued. Other manufacturers have arisen to the task as well. Busse has been mentioned-although I don't agree with some company practices, especially the pricetag (and a few off the wall designs and fruity features) their proprietary steel can't be beat. RAT Cutlery offers a lifetime you-break-it-we-replace-it no questions warranty, with great 1095 steel and the best factory fit and finish in the business. I HIGHLY recommend a HEST, RC5 or RC6. I find the RC3 and 4 handles to be too small and slippery for extensive use, though the other blades are simply fantastic. SOG's SEAL Pup in AUS8 (if you can find one) is another good choice, very comfortable well balanced fighting knife in a good tough stainless steel. The Cold Steel SRK is one of my alltime favorite combat utility designs, if you can find it in Carbon V at an inexpensive price you'll be a happy camper. I have no personal experience with Chris Reeve, but lust after the Pacific as a combat utility blade. The Microtech Currahee in D2 is a good choice under 200 bones.

For around base everyday utility working blades, check out the Becker BK11. It simply can't be beat for general cutting tasks and toughness. Plus, it's only 30 bucks.
 
Busse, Scrapyard, Swamprat, and ESEE

Scrapyard dumpster mutt, Scrapper 5 or 6 would be a really nice knife to deploy with.
 
A1 from Fallkniven, they are a VG10 Stainless and will hold up well in any situation, hot, cold, wet, dry, etc...corrosion resistant. The grind is convex. The weight and size are excellent (RC5...a shorter blade much heavier knife couldnt hang with my A1 in any tests I did!!!), handle is very good both in wet and dry, sheath (not my favorite) but is very simple yet extremely functional (locks well)...it doesnt do more than a sheath should do nor cause a knife to become overally big in it, size and weight for a soldier is important. I wouldnt recommend any other knife. It will take a beating...I have beat my more than Ike beat Tina!!! Then beat it some more! I have beat it more than Michael Jackson. It is my favorite knife and my go to knife. I couldn't imagine a better fit.

Then get a leatherman Wave multitool (I useit damn near everyday!!!) or the Surge...surge is a bigger Wave. I did a review on multitool.org on the Gerber Pro-Scout, Leatherman Wave, Sog PowerAssist, Gerber Flik, and the Vic Swisstool Spirit X. The Leatherman Wave came out ahead of the pack. The Vic was pretty good also but the blade on the spirit was not nearly as nice!! And the sheath on the Wave was extremely versatile. It can be mount two ways and can hold additional bits. But there is one multitool that might fit him better. I have not tested or seen it but it serves a purpose the Leatherman MUT. It is made as a multitool to complement an M16/AR15/M4. Has a punch and all the tools for additional field work on a M16/AR15/M4. Might be worth a look.

http://www.leatherman.com/product/MUT

I think leatherman makes the best multitools around. I have tried them all and keep coming back to them. I use a skeletool in my fishing box as well...this get a lot of use as well. Oh and I almost forgot...the Charge!!! That is also on my short list for Multitools!!!

Let us know what you do.
 
Fehrman Last Chance.

Mine took a couple of extra weeks to order because Fehrman had a large military order that he had to complete first, so I know these blades are over there.

It's got a 5.5" blade, it's tough as hell, and very, VERY, capable.

Have a look...

DSCN1240.jpg
 
You must log in or register to reply here.
Back
Top