My next 3 knives....

Status
Not open for further replies.
spiral, unless you plan on performance driving in your truck, I'd get a street grade pad. Ceramics will work better only if they're hot. On a cold rotor they stink (not the smelly kind either)! For Sandy's Mustang, I get the mid-grade street pads from Advance Auto. A bump or two harder than OEM, these are the pads that deposit the dark dust on the wheels from normal driving. They have a lifetime warranty, so save your recipt! On my Cobra, I run Hawk HP-1 pads. They really don't work well until hot, but man do they grab when running at temp! And bed them in. They will stop better and last longer.

I ran a set of EBC (Green Stuff, I think) on Brembo slotted rotors on my GP GTP a few years back. It worked pretty well for me (plus it looked cool :rolleyes::D). This is my first truck so the brake set up is a bit of a mystery for me. I have what I consider a sport truck (Colorado ZQ8) but there isn't exactly a wealth of performance parts or info... I may look into the Hawk pads. :thumbup: but will most likely go with whatever I can get OTC at Advance.... I am too lazy to mess with it much these days.:D
 
Nice truck! :thumbup:

I've used the Green EBC before too. They worked great on the street, but horrible at the track. The Cobra has had a little work done to the brakes...4 piston Brembos up front with Brembo's slotted full vein vent rotors. 2 piston Brembo set up on the back. The Hawk HP-1 pads seem to work better with the 4 piston set up than the EBC pads did. The brake bias is 70/30, so I don't need a lot of grab in the back.
 
Sounds like you may have a bit of a speed addiction. I was a novice tinkerer in college and have never been fortunate enough to have the time or the money to get into building up a car or spending any time at the track. That's kinda why I got into knives.... considerably cheaper than cars.

When I had that GP I really wanted to do an M90 supercharger/turbo hybrid (forced induction not froofroo battery crap) build up and do some drag racing. Maybe some day.:o

Back to the knives...... I suspect my next three will be the OD1, a ZT0300 and a packrat. Of course all of that is assuming something shiny and vintage doesn't catch my attention. :D
 
Yeah, I've been addicted to speed since about 1969. I wish I still had my 1967 Firebird 400. Loved that high output small block 400! My road course days are over, and I really miss them. Now it's fun runs, an autocross here or there and an occasional SVT open track event at Charlotte, VIR, or Road Atlanta.

Once the OD-1 and Zing get here, along with the 4 110V Shallots that are ordered, I imagine that will be it for a few months. That and RAT's SERE 5. Hellbay can be a very dangerous place to visit...there's always something there that gets my attention. Just when I say enough, I find another MC TIZDP! I plan on taking it easy most of December, work wise, so perhaps I'll get some stuff done around here that I've put off, and cool my jets on the knife buying thing. I think I said that last November too. Didn't work out as planned! Soooo many Kershaws, so little time!
 
Kershaw brake pads????

I would buy em!

D2 or Sg2... which has more stopping power?

You would have to worry about high hardness D2 chipping out in emergency stopping situations, and the SG2 might roll an edge.....I'm thinking 14C28N :thumbup::D
 
And now you have a nice new strop to use on 'em too:D That was a good contest, I'm thinking of buying one of those.

Jon

Hey jonnymac,Yea that was the first contest I won here(or anywhere:D).It was a big surprise to me.I can't wait till it gets here.
I'm getting the CB Shallot first.The CB Leek I got,got me hooked on composites!I gotta save some more to get the ultimate CB knife.The Tyrade!:thumbup:..also love the way the CB JYD looks too!I'm really interested in trying out that CPM-110V Shallot.I think I'm gonna pair it up with the ZDP CB Shallot & see how many boxes I can cut up before either one starts to dull.

Wow this thread really took off!I posted it & went to work,then came back to 43 replies!


SPXtrader you're a big showoff!:p Leave some for the rest of us poor guys:D

Take Care,
John
 
Last edited:
I'm in the beginnings of negotiating a price and purchase of a house, so my
knife buying is on hold for now. :(

Maybe my son will get me a Kershaw or 2 for Christmas. ;)
 
First house? If so, Congratulations Vinny! :thumbup: Home ownership is a great thing! If nothing else, it will give you memories that you will never forget!

It also gives you something to do (every single weekend, all year long, without fail, that usually involves money).

If you don't have a pick up truck, or have a close relative that has a pick up truck, you'll need one (what's a little extra money, right?).

Unless it's a "fixer-upper" (you're gonna need a ton of money for this) there's always something you can improve on it: painting rooms, re-doing bathrooms, hanging wallpaper, new carpet or refinishing the hardwood floors, etc. (but that still costs money).

You'll love your first springtime in your new home! In the springtime, you get to plant all kinds of stuff and pretty up the outside (you'll need money for this too...this stuff isn't free, unless you dig it up in the National Forest. I told you you'd need a pick up truck.). If it's your first home, you get to buy a new lawnmower/tractor, weed-whacker, leaf blower, hedge trimmers, rakes, shovels, ladders, wheelbarrow, chainsaws etc. (lotsa money needed here). If there's anything on it that isn't vinyl clad, you get to scrape, glaze, sand, caulk, prime and paint those parts (that costs money, too).

Summertime is great in your home. Warm evenings, relaxing with a cold one (being able to actually see your grass grow, the same grass that you will have to cut every weekend. Regret spending all that money on fertilizer yet?).

The fall is a beautiful time in your first home! Make sure to take lots of pictures of the trees changing color (when you aren't spending every weekend on ladders cleaning out the gutters, but hey! You've already bought the ladders and leaf blower by now!).

Wintertime is fun! Playing with the wife/kids/dogs in the snow (having to shovel the driveway and walk, and hoping no ice storms, least you have to take your new chainsaw and cut up the limbs that have snapped off the trees and crashed into your home. But look on the bright side! You've already bought the chainsaw, and it's free fireplace/stove wood!) will give you memories that will last a lifetime!

Now and then some stuff will break that you can't fix (like a water heater, furnace or heat pump that costs more money).

Getting to pick out the color of your new shingles is fun (and that costs a whole bunch of money).

Then you'll be looking at an addition, or garage or bigger deck or something (and that costs a boat-load of money)!

You'll love it! Like I said, home ownership is a great thing (:confused:)! :thumbup:




:D
 
It also gives you something to do (every single weekend, all year long, without fail, that usually involves money).

That's what puts the homo in home-ownership :D

Having just completely modernized a 30+ year old house, and gotten my Bob Villa merit badge, I am DONE with house repairs when I sell and move.

My next house will be no older than 5 years, everything will be need to be in 95% excellent condition when I move in, and when stuff breaks I will fix it. I am done with fixer uppers.

DV I can even fix the water heater!
 
I can even fix the water heater!

Excellent! :thumbup:

I just spent a few days tracking down a bad solder joint on one of circuit boards on the dryer. What a PITA! But the dryer repair man wanted $ 80 just to come look at it. That's a new knife or two right there! :D
 
My last washer repair cost $129...the part cost $12. Ridiculous.

Mine was a dryer and cost $450. Some plastic shim that holds the barrel in place broke. It was 15 years old and didn't dry very well. I was all out of Duck tape. (duct tape for the proper english speaking viewers.) So I bought a new one.
 
Regardless of how you spell it, the stuff does the job!

attachment.php


It also makes a dandy babysitter!

attachment.php
 

Attachments

  • duck taped duck.jpg
    duck taped duck.jpg
    26.8 KB · Views: 35
  • duck taped baby.jpg
    duck taped baby.jpg
    17.8 KB · Views: 35
spiral, unless you plan on performance driving in your truck, I'd get a street grade pad. Ceramics will work better only if they're hot. On a cold rotor they stink (not the smelly kind either)! For Sandy's Mustang, I get the mid-grade street pads from Advance Auto. A bump or two harder than OEM, these are the pads that deposit the dark dust on the wheels from normal driving. They have a lifetime warranty, so save your recipt! On my Cobra, I run Hawk HP-1 pads. They really don't work well until hot, but man do they grab when running at temp! And bed them in. They will stop better and last longer.

man I knew you were cool! Cobra owner and Kershaw lover, winnar.

I've been running Hawk HPS on the Jetta... HUGE improvement.
 
Status
Not open for further replies.
Back
Top