"Old Knives"

Nice Old Congress there Kev, absolutely a first rate Knife!

Here is a Knife that really does not compare at all to grab the attention of the laste few pages of stunning Knives, but like I said earlier in reply to Augie showing that Beautiful Case scout, old Knives generate massive interest, and to each individual I am sure there is a common love among the people who continually haunt this very popular Thread and that is to view old Knives, The Old stamps, the Fonts used in the Stamps, The Jig work of different Bone, Blade etches, Swage work - the list goes on.

The Cutler firm who made this Jack we all know very well as a firm that made the "Good Ol English Knives" and most if not all are extremely well made - Lockwood Bros. This Knife is not like the other Lockwood's featured here or in Charlies " Prune Big or go Home" Thread, where some of the stunning and very Old Lockwoods are displayed.
The only reason I picked this up is because it was a pattern I have not seen a lot of before from Lockwood, not like the Ettrick in fact more like a Saddlehorn but the frame stay in one true Line without a swell end.

I think the time fram for this Knife having Brass Liners would be pre WW2 but how much earlier I am not too sure, perhaps 1930.

The Dense wood Handles could possibly be Mahogany, it could possibly be a slightly lighter Ebony.
The Main is short we can see that, but I just like the overall frame of this Knife - especially the deep stamping that these Sheffield Knives have.
It features a Wrap around Spring for the Pen, Swage work on the Main is Nice as is the Swage on the Pile side of the Pen.
Springs are still strong! Very nice walk and talk.
I simply held this knife up to the Diamond stone and it almost sharpened itself! The Blades are Super sharp after just a couple of passes.

Im sorry to go on, I am not trying to make a big deal over a simp[le Knife, I just think this is a very attractive package a shame the Main is somewhat shorter- but still looking good!

NSfaSI9.jpg


9FwgLRx.jpg


ASLfSAG.jpg


pCDizJP.jpg


rdGIepZ.jpg


Staying in Sheffield, here's a couple of well used, well loved Lambsfoot Knives, these will feature in more detail in Jacks Lambsfoot Thread :)

1AFVfzu.jpg
 
Campbellclanman Campbellclanman
Duncan, you certainly have my attention. That Lockwood is a beauty !
Swaying lines, possibly cocobolla? tightly grained, centered blades, a full wrap and what looks like nickel structural pins with brass pins for the scales. I'm not sure I'm deciphering the blades stam correctly... "NEAL-HEAL-REAL KNIFE" ? Indeed worthy of all :cool::thumbsup::thumbsup:
Looking forward to those Gawgeous Lambs in J.B.s thread as well.

Cheers mate,
Gus
 
Thanks Gus

Lockwood Bros. Brand name widely used is “Real Pampa Knife” ( with the running Ostrich ).
I’m not too sure how much Cocobolo Sheffield used Gus?
If this were an American Knife I would have instantly guessed this being Cocobolo as it looks to have that lovely deep tonings.
I could be very wrong - and it would be great to get some form of confirmation on the Types of Woods English - more specifically Sheffield Cutler firms used, I know Rosewood and Mahogany were used but Cocobolo I have not seen it mentioned much?
 
I have been waiting for this one, or one like it for quite a while. My first Robeson with a round tang stamp! Smooth w/t, and somewhat still snappy. A tad cleaned, yet retaining most of it’s original lines. The colours and jigged bone had a hold of me, and I had mentioned it to Rob rockman0 rockman0 in excitement of it’s arrival... thankfully it’s precisely as expected:):thumbsup::thumbsup:
View attachment 1530157 View attachment 1530158 View attachment 1530159
View attachment 1530170

Really like the tipped bolsters on that one, sets it off!
 
That's a nice old Robeson, Gus. Love the bone:thumbsup::thumbsup:, that will be a nice one to carry, fits a watch pocket perfect :thumbsup:

I have been waiting for this one, or one like it for quite a while. My first Robeson with a round tang stamp! Smooth w/t, and somewhat still snappy. A tad cleaned, yet retaining most of it’s original lines. The colours and jigged bone had a hold of me, and I had mentioned it to Rob rockman0 rockman0 in excitement of it’s arrival... thankfully it’s precisely as expected:):thumbsup::thumbsup:
View attachment 1530157 View attachment 1530158 View attachment 1530159
View attachment 1530170
 
Nice Old Congress there Kev, absolutely a first rate Knife!

Here is a Knife that really does not compare at all to grab the attention of the laste few pages of stunning Knives, but like I said earlier in reply to Augie showing that Beautiful Case scout, old Knives generate massive interest, and to each individual I am sure there is a common love among the people who continually haunt this very popular Thread and that is to view old Knives, The Old stamps, the Fonts used in the Stamps, The Jig work of different Bone, Blade etches, Swage work - the list goes on.

The Cutler firm who made this Jack we all know very well as a firm that made the "Good Ol English Knives" and most if not all are extremely well made - Lockwood Bros. This Knife is not like the other Lockwood's featured here or in Charlies " Prune Big or go Home" Thread, where some of the stunning and very Old Lockwoods are displayed.
The only reason I picked this up is because it was a pattern I have not seen a lot of before from Lockwood, not like the Ettrick in fact more like a Saddlehorn but the frame stay in one true Line without a swell end.

I think the time fram for this Knife having Brass Liners would be pre WW2 but how much earlier I am not too sure, perhaps 1930.

The Dense wood Handles could possibly be Mahogany, it could possibly be a slightly lighter Ebony.
The Main is short we can see that, but I just like the overall frame of this Knife - especially the deep stamping that these Sheffield Knives have.
It features a Wrap around Spring for the Pen, Swage work on the Main is Nice as is the Swage on the Pile side of the Pen.
Springs are still strong! Very nice walk and talk.
I simply held this knife up to the Diamond stone and it almost sharpened itself! The Blades are Super sharp after just a couple of passes.

Im sorry to go on, I am not trying to make a big deal over a simp[le Knife, I just think this is a very attractive package a shame the Main is somewhat shorter- but still looking good!

NSfaSI9.jpg


9FwgLRx.jpg


ASLfSAG.jpg


pCDizJP.jpg


rdGIepZ.jpg


Staying in Sheffield, here's a couple of well used, well loved Lambsfoot Knives, these will feature in more detail in Jacks Lambsfoot Thread :)

1AFVfzu.jpg
That Lockwood is a fine old Jack. Elegant but sturdy. :thumbsup: I'm never any good at dating English knives. Does the tang stamp look like this?
XMlw5we.jpg

iHYX8pe.jpg

Got this beauty in today... I see the Barlow thread pop up every now & then and to me, the perfect traditional barlow looks like this one :D r8shell r8shell calls it the "smooth caramel bone" and it's my favorite :thumbsup:

View attachment 1531037 View attachment 1531038 View attachment 1531039 View attachment 1531041
Mmmm...caramel.
 
Picked up this nice Schrade Electrician with a different lock mechanism for the screwdriver blade than I have seen before. The notch in the screwdriver tang engages a tab on the back spring. The tab crosses over to the main blade side, pushing down on the main blade in the closed position causes it's tang to push the tab down and disengage the lock. I thought it was quite a clever design and not one I have come across before.
CB1w1J0.jpg

Qcg4ohO.jpg

LdepYBS.jpg
 
Picked up this nice Schrade Electrician with a different lock mechanism for the screwdriver blade than I have seen before. The notch in the screwdriver tang engages a tab on the back spring. The tab crosses over to the main blade side, pushing down on the main blade in the closed position causes it's tang to push the tab down and disengage the lock. I thought it was quite a clever design and not one I have come across before.
CB1w1J0.jpg

Qcg4ohO.jpg

LdepYBS.jpg
Nice knife, p&g!! That lock predates the ubiquitous linerlocks!!:cool:
 
Back
Top