Order of KAI Official Hang Out; Good Times & Joyous Knives

Status
Not open for further replies.
sticktodrum said:
I mentioned Moxy earlier, but I think we should review the roster and make some adjustments. There are a lot of "members" that are pretty much nonexistant here.
Click to expand...

I agree...here's the members list.

#0000 - Pete Kershaw, the beginning.
#0001 - Reserved
#0002 - Reserved
#0003 - Reserved
#0004 - jonnymac44
#0005 - 2brothers
#0006 - kneedeep
#0007 - KershawGuy
#0008 - SPXTrader
#0009 - svrider3
#0010 - PG5768
#0011 - Morrow
#0012 - Temporarily Reserved
#0013 - Temporarily Reserved
#0014 - jimw451 - Janitor
#0015 - OldSarSwmr
#0016 - EagleScouter
#0017 - TX180SX
#0018 - mqqn
#0019 - flarp
#0020 - crackedblade
#0021 - Tony8179
#0022 - SOLEIL
#0023 - wobly
#0024 - mmkjohnson1
#0025 - jhyde7585
#0026 - xICEMANx
#0027 - MrFoo
#0028 - Daniel Dorn
#0029 - Avira
#0030 - tobotech
#0031 - mrn8 - 33
#0032 - Chris Pierce
#0033 - nevermind35
#0034 - KnottyEagle
#0035 - tecstar1
#0036 - Rival1314
#0039 - stevekolt
#0040 - AdioSS
#0041 - seelow123
#0042 - oregonknifenerd - Janitor
#0043
#0044 - sinsanity
#0045 - Cal45 Pending Pics
#0050 - 2shot
#0057 - BobSig - Janitor
#0064 - chris6464h
#0066 - roy06
#0069 - whateatsrabbits
#0075 - ono724
#0077 - SpyderPhreak
#0085 - solidorange - Janitor
#0088 - PGeo00
#0113 - bad_juju - Janitor
#0117 - NeverMore1701
#0123 - asm3686
#0129 - MDQBox
#0130 - ArchAngel
#0169 - TotalDbag
#0187 - Halfneck
#0200 - VENI VIDI VICI
#0210 - nwmetalbug
#0220 - Chester22
#0321 - sticktodrum
#0392 - gooeytek
#0550 - prelude92
#0560 - BrentD86
#0561 - mcraft
#0566 - Steel130
#0618 - stebolicious
#0712 - OvalmanPA
#0720 - DEATHBYF1RE
#0780 - scottabrandeberry
#0666 - greeenie
#0777 - rickdarris2004
#0820 - daveb068
#0888 - poolhustler
#1110 - DrOpPoInT1110
#1531 - Bear Claw Chris Lappe
#1760 - SpyKers
#1947 - freewheeling *
#1982 - kagato82
#7777 - 9blades
#9999 - Moxy *
Click to expand...
 
I'm back ladies!

Half burnt.... from the sun! Drank lots of beer and still finding sand in places it shouldn't be!

Brown handle Blur, Tan skyline and ram were awesome as beach edc's. Forgot the ram in my pocket and it went through the salt water then the pool and no worse for the wear. Tan skyline saved my butt at the stall when I went to see a man about a horse. The lock was broken and the blade of the skyline perfectly fit the void and worked as a lock! Good thing because 3 people tried to walk in on me.
 
Justin! Welcome back fool! :p

And yeah, I see a Tyrade, an 0350, and a JYD in CB blades. I doubt you'd mistake a Tilt or a Volt for a Clash...so yeah. :D
 
A new arrival today finally have a 560cbcf to call my own. Had to take a 560 family pic. NIB 560 that rick engraved at blade. The NIB cbcf. And my acid etched stone washed 560.

2013-06-29_11-34-47_513.jpg
 
Oh ya lol, fixed,
Anyone know where i can get a TYRADE, lol they look really similar and the pic didnt ahow the model number... Soo, ya, what do they go for?
 
VENI VIDI VICI said:
Oh ya lol, fixed,
Anyone know where i can get a TYRADE, lol they look really similar and the pic didnt ahow the model number... Soo, ya, what do they go for?
Click to expand...

They are discontinued...they come up on ebay for high prices, and one the exchange occasionally. Couldn't really say about the price though.
 
Oh, allright, lol, at least i learned of another kershaw... I think i want a cb shallot as my first composite than, (i do know the priceing, and discontinuation) yay! Just got a diamond stone!
Love it...

Ps. I typed half of this an hour or so ago and forgot i didnt finish.. Lol
 
Has anyone sharpened their 560cbcf? I just redid mine at factory angle and it is scary only went to 1000 grit wanted to keep some tooth to the blade and the results are absolutely scary never have I handled a blade of this sharpness and most of my collection has been sharpened on the same WE using same techniques
 
asm3686 said:
Has anyone sharpened their 560cbcf? I just redid mine at factory angle and it is scary only went to 1000 grit wanted to keep some tooth to the blade and the results are absolutely scary never have I handled a blade of this sharpness and most of my collection has been sharpened on the same WE using same techniques
Click to expand...

i cant wait to find out. i promise to cut myself with it
 
asm3686 said:
Has anyone sharpened their 560cbcf? I just redid mine at factory angle and it is scary only went to 1000 grit wanted to keep some tooth to the blade and the results are absolutely scary never have I handled a blade of this sharpness and most of my collection has been sharpened on the same WE using same techniques
Click to expand...
I have not tried S110V. I have a custom coming soon in it though that I am excited about.
 
Status
Not open for further replies.
Back
Top