Rubber Bucky will make the rounds again!

After spending a week or so with Clint's 112, I have to say that I really like this design! My EDC for the past few months has been the 112FG, so the new rubber bucky dropped in my cordura sheath like a custom. If there was an issue, the rubber scales gripped a litte too good when taking her out of the sheath.

What did I cut, cardboard boxes, sirloin and chicken; worked like a champ.

I took a few photos next to my 112FG, after I reprofiled the edge (slightly) with a diamond, then free hand on oil stones and cleaned it up a bit. It should cut well now.






I'm going to send her onto Hawkeye in Texas tomorrow. Thank you, it was a pleasure!

Woody
 
i am sure clint will like reading thyat it worked well forn you ...
i know i did !

i may ask joe if we can get the very first one back ..to send around some more

got 3 to finish up..and
have an emergency project for clint to do that he needs real bad..
 
A 112 in my mind is THE best all around Buck..... The 112 can do anything a 110 can but it fits smaller hands better...I like the grip on the 450 too.
 
334dave said:
i am sure clint will like reading thyat it worked well forn you ...
i know i did !

i may ask joe if we can get the very first one back ..to send around some more

got 3 to finish up..and
have an emergency project for clint to do that he needs real bad..
Click to expand...

Dave, You've created a winner... I hope Joe helps take this to market. Can't wait to see your "other" project!

Woody
 
Thanks Woody, I will be out at the mail box patting my foot till
it gets here.:D Will be sure to let you know when it gets here.:thumbup:
Hawkeye
 
ya know every time i see one of these later i feel i needed to do a better job..
i keep telling my self that these grips were not designed to be on a 112 /110
and that it can not be a pirty as a factory one can..
 
334dave said:
ya know every time i see one of these later i feel i needed to do a better job..
i keep telling my self that these grips were not designed to be on a 112 /110
and that it can not be a pirty as a factory one can..
Click to expand...

Pirty is as pirty does!! :thumbup:
 
334dave said:
ya know every time i see one of these later i feel i needed to do a better job..
i keep telling my self that these grips were not designed to be on a 112 /110
and that it can not be a pirty as a factory one can..
Click to expand...

Don't be too hard on yerself... think of it as a prototype. I bet Joe can find someone to make scales that were designed for the 110/112. ;) :thumbup:

Thanks Jeff, the PO told me about 4 days to get to Texas...

Woody
 
well here are the new rubber buckies..
.


ref the 2ed pict..the top one is one donated by our friend Steve T.
the one on th bottom is the horsebuck alpha
it is expermental as it is so wide ..it fits in a 446 sheath
the one that is in the middle [bottom in top pict]
is the one i really want feed back on..i almost keep this one!!
the more i held it the more i liked it better then the finger grooved or the normal rubber bucky!!!
ps: i also sent a "jar" of home made there for them to enjoy!

but to contune, i have sent today all three in the picts to afgan badlands for distribution.
if i get a positive report on that odd one then i will make another and send one of them around for you guys to try..
 
334dave said:
well here are the new rubber buckies..
.


ref the 2ed pict..the top one is one donated by our friend Steve T.
the one on th bottom is the horsebuck alpha
it is expermental as it is so wide ..it fits in a 446 sheath
the one that is in the middle [bottom in top pict]
is the one i really want feed back on..i almost keep this one!!
the more i held it the more i liked it better then the finger grooved or the normal rubber bucky!!!
ps: i also sent a "jar" of home made there for them to enjoy!

but to contune, i have sent today all three in the picts to afgan badlands for distribution.
if i get a positive report on that odd one then i will make another and send one of them around for you guys to try..
Click to expand...

You do masterful work Dave -- always glad to help out the cause. Jar of homemade? Very nice, pass it around!! LOL
 
No Rubber Bucky yet.I got a e-mail from from Woody that the tracking said it was in Big D (Dallas) on the 17th.that means it in Tyler now.But Monday
is a holiday so.....I will probley get it Tuesday. I will be back in town on Thursday. I will be sure to post when it does get here.
 
Hawkeye5 said:
No Rubber Bucky yet.I got a e-mail from from Woody that the tracking said it was in Big D (Dallas) on the 17th.that means it in Tyler now.But Monday
is a holiday so.....I will probley get it Tuesday. I will be back in town on Thursday. I will be sure to post when it does get here.
Click to expand...

Hawkeye, PM or email as to who is next on the list and I will forward the original on and you can return Bucksway's to him. Thanks!!
 
Well the Rubber Bucky made it back to Texas.I can't wait to cut something with it. I'll let you know how it cuts.I know Woody did a good job of
making her sharp.:thumbup:
 
Hawkeye5 said:
Well the Rubber Bucky made it back to Texas.I can't wait to cut something with it. I'll let you know how it cuts.I know Woody did a good job of
making her sharp.:thumbup:
Click to expand...

Thanks buddy -- glad it arrived safely, sorry it took so long the holiday did not help.
 
I still have the "original" Rubber Bucky that Dave started on the pass around a few months back, and need to know who else would like to try it out. PM or email me and I'll get it sent out.
 
RUBBER BUCKY 112FG ready for it's All American Tour.

PM or e-mail me with your addy and $30 for shipping and handling ;)

Nice sheath BTW, who did it belong to? Hmmm...that may not make it in the box. It has magically disappeared?!?!?!?!?!? :rolleyes:
 
yep dont bee shy!
give it a try
jest send your name and addy
to tin sue 110 or goose 112
 
You must log in or register to reply here.
Back
Top