"Slipjoint Swap Meet" (Read Rules In Post #1)

[Blues]

How many times does Blues have to tell U guys.

DO THE CORRESPONDENCE OF THE TRADES,VIA PM OR E-MAIL
ONLY LIST WHAT U WANT TO TRADE & WHAT FOR

Thanks, Vince. :thumbup:


Fellas, it's pretty simple. If you see something you're interested in, contact the individual via email or PM. Don't conduct your horse trading within the thread.

READ THE GUIDELINES!

 

[Fred Sanford]

No longer for trade. Going to have a nice sheath made for her instead.

-----------------------------------------------------------------------


Here's what I have folks....

1. Great Eastern Cutlery Northfield Whittler Stockman. I just ordered this knife about 4 days ago. I just got it today and it's just bigger than I want. It's also kinda heavy for my tastes. It is a tank of a knife but it is awesome. It's just not 'my thing'. It's got yellow banana peel bone scales, 1095 blades, 3 full backsprings and it's beautiful. It has a long pull on the main clip blade. There is also a small spearpoint blade and a small spey blade. It comes with what looks like a brass stamping of a GEC blade. I'm not actually sure what it is but it's pretty sweet. This knife has pinched bolsters too that are at a slight angle. There is just nothing bad to say about it. It is brand spanking new and has never been used, carried, or sharpened. It comes just like you see it in the pictures. Nice little tube and waxpaper to boot.

I'm looking for a nice slippy but a bit smaller. Something in the 3" to 3.7" range when closed. I like Barlows, Gunstocks, Medium Stockmans. I also like wharncliffe and sheepsfoot blades.

PM or email me please. DO NOT DISCUSS within this thread. david dot lowry [at] att dot net

 

[sunnyd]

~ Near, Near, Mint 1975 (5 dot) Case Yellow scaled 'Birdseye' Stock Knife, model # 33044 in Hi-Carbon steel.

~ 3 1/4 inches in the closed position.

ALL GONE AS OF TODAY, 11/07/2009 @ 5:01 PM EST !

 

[navihawk]

traded


I have a Case mini hunter for trade. I carried it a bit but didn't really cut anything but string or to take down a box or two. Still has the factory edge. The action was a little crunchy feeling so I sent it back to Case for repair. It came back walking and talking as smooth as glass. I'm looking for a mediun stockman Queen or single backspring Muskrat Queen in 1095 or D2.It has really nice blue grey scales. I'll take better pics if someone is interested.

 

[Capt. Carl]

-------------

 

[navihawk]

traded. Gone but not forgotten



Slightly used two dogs. carried this one for a while. may have been sharpened once.
Looking for Queen stockmans Cocobola, mint or a nice bone, can be slightly used like this one. Also looking for Queen city or Queen single backspring muskrats.
this knife is tight.

 

[dslteck]

*traded*

 

[TheGent]

I have a few I need to unload. I am adding some new knives.

Here goes :thumbup: I have:
New, no box Case Mini Trapper Chestnut Bone CV
New, no box Case Black G-10 Russlock SS

I can provide pics of all the knives.

I am looking for:
A good Barlow w/ clip and pen blade or jack with clip and pen blades of similar size or up to 4" closed length.
A good quality traditional fixed blade with 3" blade at the most and a leather sheath.
Buck Mini-Alpha Hunter
Used, good condition is acceptable. Please email me at printritter@gmail.com

Thanks,

Print

 

[navihawk]

I have a gunboat Hen & Rooster stockman up for trade. Older Bertram in carbon steel. Looking for a Schatt & Morgan gunstock stockman or large Queen stockman in bone or stag, maybe cocobola.Must be tight like this one, and used the same. I can take better pics if need be.Carried for a bit, sharpened once if even.Couple of spots on the spey and very light scratches on other side of main blade.
Stag is outstanding on this one.

 

[300Bucks]

YOU SNOOZE YOU LOSE ______IT"S GONE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCrosman 910 Stockman, NIB, Old Stock.
Will trade for nice Buck 300 series or nice TL-29 wood or color scale, Cami preferred.
300Bucks

 

[serratededge]

nevermind

 

[300Bucks]

Ok, Let's try a more poplar brand.
I collect Buck 300 series or TL-29s

Case small stockman, NIB worn jigged bone in red, SS

 

[spydutch]

Greetings,

I just got my Case Chesnut Mini Trapper in CV, but it's not really my thing.

It's absolutely NIB. I only opened in to check it out.
It has absolutely no play and the blades are centered.
Only a hair of a gap between the liner/scale on the spey blade side.
Still has the factory edge and I didn't cut anything with it.

I would very much like to trade this knife fot a NIB Chesnut Peanut in CV.


It's very important to me that there is absolutely no play or gaps and that the blades are centered and don't rub scales or liners.

I'm interested in other NIB CV Pen/Jack knives as wel as long as they meet above mentioned conditions.

If you are ineterested please contact me at:

arendderink@msn.com

 

[TheGent]

I have here two users for trade:
A Remington USA Bullet Knife Mini Trapper - I carried this one a couple times and it is in excellent condition. Strong backsprings, no blade play and half stops. Same for the Case Caramel Barnboard Bone Saddlehorn. Excellent knives, but no boxes. I would trade either one, take your pick, for a Buck 112 Ranger or folding lockback hunter of the same size as the 112.

Thanks,

Print

 

[navihawk]

See if we can't get this section moving. Up for grrabs in an E-C Cutlery from Germany.
Specs: Ebony handled sowbelly, steel pins pinned shield fancy bolsters
Nice tight knife with walk and talk. Appears to have been cleaned when I got it.
A good user for sure. Steel blades, nice swedges.
I'm looking for American made stockmans, used is ok,
Queen, Cammilus,anything old with square ends ans bone or wood unless you have a fine UH or older shrade with a cali clip. Also Western stockmans, Sears... ect. ect....
Also looking for Moose trappers, and muskrats.

 

[crbauhs]

Ok I have an un-finished Camillus made Cold Steel Large Stockman. I did peen the pivot pins. The spey blade is perfect, the main and sheepsfoot will need to be redone. That is just something I cant seem to do. The blade don't even have a bevel on them, and have no patina. You will need to file/sand down the springs to be flush. Would be a fun project for someone who knows what to do. I'd love to trade for a USA made Schrade roughly the same size with carbon steel of course. Would look at any Carbon steel stockmans however. I just don't want to see this knife sit around if I won't be able to use it.

 

[sunnyd]

Up for trade is this guaranteed and authentic vintage 1925-1945 'Queen City' QUEEN produced 3 blade Stockman slip jiont pocket knife..

If any of you all have any questions or need further information, please just ask.

Merry Christmas & Many Blessings!


Best Always,
Anthony

 

[Coonskinner]

I have a brand spanking new Yellow Case large CV trapper, with the box and original papers.

I have another exactly like it and don't need two.

I would be open to trading for something traditional with carbon steel blades only.

If interested, contact me at: coonskinner124@gmail.com

Update: The Trapper is traded. thanks to those who were interested.

 

[DrOpPoInT1110]

I have a Remington-Camillus peanut knife from the 80's used but in good condition, i've only seen two more of these on the web. it's 2 3/4" closed, 5" open....if interested or if you want pics, shoot me an email: a.elsawaf1110@gmail.com

i'm looking for mainly single blade slippies but two-three blade ones are fine too.

 

[DrOpPoInT1110]

sorry, double post