"Slipjoint Swap Meet" (Read Rules In Post #1)

[VCM3]

This was made in the N.Y. Knife Co. factory,that this import firm bought & owned,between 1910 to 1920. Walden Stamp. You can see the bone similarities. No cracks,hammered pins.3'5" closed,carbon blades of course,match striker long pull on main.Half stops,tight,good snap,no blade wiggle.
Traded,Thanks!
Thanks,
-Vince

 

[gradall5200]

Looking to trade this custom schrade LB5 usa made. It was made by dale vincent "orvet" here at blade forums. He sharpened the knife when he made it. It has never been used or carried. Knife locks open tight but does not snap closed but does stay closed. very nice knife looking to trade for usa schrades or old butcher/ kitchen knives but open to all trades!!! thanks- Joel

 

[Sword and Shield]

I've two I'd like to trade off, just taking up space.

First is a Camillus Rough Cut stockman, 4". Steel bolsters and liners, grooved Delrin covers. It's been used, but not hard- minimal scratches on the blades, no staining that I can see, etch is full on the master blade.

IIRC, these were made as over-runs from when Camillus made a series of slipjoints for Cold Steel. Blades are carbon, Cold Steel's Carbon V (believed to be same as Case CV), thin, and nicely sharp.

The other is an autumn bone Case butterbean in SS. Mint, in the original box, all paperwork.

I'd like the yellow-handled Rough Riders as a trade, preferably larger patterns.

 

[Sword and Shield]

Trade offer has been received from Willgoy for the Case, the Camillus is still up for trades. Looking for a large RR stockman in yellow, will listen for other larger patterns.

 

[dispatch 510]

Case Russlock G-10 SS.

Looking for a trapper in cv but open to all trades. Also fixed blades

Traded

 

[black mamba]

FOR TRADE: Northfield UN-X-LD cigar whittler, #541308 in antique amber jigged bone and 1095. Knife is mint-in-box, serialized #29 of 50. This one has pinched, ringed and slanted bolsters.

ASKING IN RETURN: Any GEC, Northfield or Tidioute #53 or #54 pattern stockman or whittler in snakewood handles.

 

[Coonskinner]

For Trade: Minty, new in box Hen and Rooster stockman, 273 DS. Stag scales.

Also...

Camillus Carbon Series Stockman, a user, but very clean and not used much. I also have the box with this one.

What I am looking for: Anything GEC, used is fine as long as it is in 1095. I could sweeten the pot a little more if need be.

I would possibly be open to other trades if anyone is interested.

coonskinner124@gmail.com

Hen and Rooster traded.

Thanks!

 

[VCM3]

I have a Case Electrician,5 dots (1975 ?) excellent un used condition,walnut,I was told,no box,and a full size trapper,dark jigged bone,9 dot (1981),has a few spots,a nice big solid knife

Both knives have great f&f,walk n talk,no wobble/play...that I caught,anyhow

I like everything,lately have been craving large folders,these are nice ones,be reasonable ,please,& thank you,
-Vince

Both knives here are spoken for,Thanks

 

[salty141]

I have 2 for trade
GEC Northfield Sunfish in amber jigger bone
Big jack gone
Both knives have been lightly used and the bolsters have some scucfs but the blades are unsharpened, both have some light spots on them just a few small ones, no rust or patina

I am looking for smaller slipjoint 3 1/2 or so handles I would trade them seperate or both for the right knife if interested please email me and I will get back to you in a day or two
Thanks, Salty

 

[billinvegas]

Hi,

Here's a few I'd like to put up for trade...

I really like GEC's offerings, looking for a stockman, barlow, jack, harness jack, or scout

Looking for Jacks (Texas, harness, easy open, just about any type)
Whittlers
Stockmans
Canoes
(or ??? let me know what you have)


Kinfolks "moose"
Blue celluloid (acrylic?)
both blades are marked "authorized reproduction stainless" on the back

Case Trapper
62048SP
Tang - Case XX Stainless USA 5 dots
main blade is down about 10-15% perhaps

Case Russlock
61953 L
Tang - Long tail "C" 1 Dot 5 X's

Case Mini Hunter
62165 TH SS
Tang - Long tail "C" 5 X's

Case Tiny Toothpick Pocket Worn 10th Anniversary 1996-2006
610096
Tang - Long Tail "C" 4 X's

Case Pen (?)
6233
Tang - Case XX USA (no dots that I can see)
(both blades are lazy on this knife)

Please e-mail with offers
Thanks!

 

[crbauhs]

Ok I have one up that I am still on the fence about. It is a 1970's Craftsman Schrade made stockman. It is 4 inches big. There is no blade play in it except in the spay blade. Nothing a little bit of time in a vice couldn't fix. The patina is by me, lotsa apples, though it is still very feint. Other than that it is in great condition. For me the swedge just doesn't feel right. Also I have a Schrade MinuteMan 104OT. Great condition, tiny patina, razor sharp mirror polish by myself. That goes for both knives. At 2.75 inches it is just too small for me.

I am looking for Cas, Queen, Boker, Etc, stockmans or a Case Copperhead. I really want a stockman in bone handle. That is something I have never had before. American made or German would be great. Carbon steel of course unless it is a nice premium stainless. Ill trade both for one knife or separate. Nothing smaller than 3.25 inches please. You can reach me by PM or email.

 

[YayILikePie]

All done. Thanks for looking.

Hey there, guys. I have a couple knives for trade. Pictures are located at the links following each knife. If you would like to see some more pictures, just let me know.

TRADED First up is a Case Barehead Slimline Trapper, yellow handle, CV blade (31048CV). It's been used, and has a couple scuffs towards the tip from sharpening, but doesn't detract from just how sharp this guy can get.

Next up is a Schrade Old Timer Middleman Jack (33OT). Just slightly larger than a peanut, with wider handle scales, this knife fits nice in the hand and is a pleasure to use. This can be seen in the patina that has formed on the main clip point blade from peeling kiwis.


Both these knives are pleasures to use, and I'll probably regret trading them eventually, but I'm in the market to try something new. I'd love to pick up another sodbuster, be it 1095, CV, Tru-Sharp, D2, or some other stainless, as long as it walks and talks. Mostly I'm looking for multi-bladed pocket knives. Either way, if either of these interest you, send me a PM or e-mail.

 

[Coonskinner]

Available for trade:

Northfield #73 Scout with red barboard scales.

This knife is very lightly used. It has been sharpened and has a patina developing.

It is razor sharp and tight with no bladeplay and the typical GEC walk and talk.

I am interested in about anything GEC so long as it is in 1095 and a different model. I have another of these #73's and am willing to let this one go to try a different model.

coonskinner124@gmail.com

Edited to add: the picture makes it look like there is surface rust near the tang, but there is not. It is some trick of the light. Those are actually places where the patina is not very developed and the light reflects funny.

 

[dan97526]

I would like to trade off this nice Camillus-made Moore Maker trapper (4-1/8"), as I have the exact same knife in the Camillus Carbon Series. NIB, uncarried. I'm looking for the following (willing to add boot if necessary):

Case trapper, CV/bone
Case Hobo with spoon
Any USA-made Hobo with spoon
Any modern S&M File and Wire
SOG or US-made Leatherman Multitool
Leatherman Squirt P4 (new only)
Queens with Winterbottom bone
Rat Izula

Always willing to consider others as well, as long as they are American made. Good used knives with full blades especially welcome! I don't really like mint condition, out-of-production knives that are too nice to use, as I am usually looking for users.

Thanks! Please include an email if replying by PM.

 

[Sword and Shield]

I've a nice hefty Case Granddaddy Barlow to throw into the mix.

Cranberry bone, silverscript Case XX on the mark side, made in 2001. Walk and talk is a little soft, about a 4-5. Some scratches on the tip of the blade from sharpening and use, but they could be sanded out without much trouble.

What I'd like? Remington R4243 large camp knife, used okay, or one of the Boker or Remington 6-blade Scout/utility knives.

 

[navihawk]

How about this NIB Imperial fish knife. Not sure if the plastic case is original to the knife. It has a wax paper with it.I'm looking for a minty tight Queen, single backspring with clip blades in Cocobola, Cozy Glen style or red bone, or winterbottom.


Imperial has some spots on one side of the blade, is tight , has the old beverage can opener,even the original oil on the tangs.
A neat piece of history.Zero shrinkage on the pearl wrap

 

[toaster burn]

I have a Victorinox Companion (same tools as a classic, but with smooth alox scales) and a Victorinox Rally (which has the very useful phillips screwdriver) up for trade. Both in excellent condition.

Traded

 

[billinvegas]

Hi,
Ok, so I miscalculated, the Pioneer is a much larger knife than I had anticipated! This one is a little too much knife for me...
Hopefully there's some big knife fans out there!

I'd like to trade it for another Great Eastern knife, (preferably 1095)

Looking for just about anything other than another Pioneer, or clip point Barlow

GEC - Tidioute Pioneer, Bocote wood handles. 2007, serialed # 133
minor scuff or two on the blade, and slight scuffs on the bolsters.

e-mail with offers please, thanks!

 

[ratamahatta]

I've got a Buck 303 cadet, it was made by Blue Mountain Turquoise, it's never been carried or sharpened.....

http://www.webwest.com/bluemountain/frame2.htm

I'd like to trade for a Boker or Bulldog brand, or whatever else you got.....pm me or email me.......

trade pending.....

 

[HAKnPocket]

Done for now