• The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
    Price is $300 $250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
    Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.

  • Today marks the 24th anniversary of 9/11. I pray that this nation does not forget the loss of lives from this horrible event. Yesterday conservative commentator Charlie Kirk was murdered, and I worry about what is to come. Please love one another and your family in these trying times - Spark

Someone must have hit the Snark button on their alarm glock!

Status
Not open for further replies.
NCSlice said:
Nice...wish I could get my Jeep to growl. Just so damn expensive, and it ain't broke.
Click to expand...

I understand that! This setup was 270 installed. Could of went cheaper but wanted black stainless pipe which cost 90 by itself.

They tried to keep the stock muffler and chrome tip that came on the truck. After the install i asked where my parts where and they said.. Oh we normally just throw them away... I laughed and said yea right That muffler has just over 500 miles on it and the chrome tip is still perfect y'all wasn't going to throw it away. I had them throw it in the bed of the truck..

Not sure what the hell i need it for.... Just wasn't going to let them have it free to sell to someone else lol
 
Last edited:
I guarantee they would...good job!
To make a bit of rumble with that 4L, I think I need everything from headers on back. Last I looked, the set up I like is around $700 and I install myself lol.
 
All my knife pics are on photo bucket, and most I deleted from my phone. I guess I can start imager or whatevs...its still not working with the app or web.
 
NCSlice said:
I guarantee they would...good job!
To make a bit of rumble with that 4L, I think I need everything from headers on back. Last I looked, the set up I like is around $700 and I install myself lol.
Click to expand...

Good lord, i wouldnt of been able to do it at 700 :eek: I just got the 40 series muffler and a single 18" stainless black pipe out the side. If i ordered both it would of cost me around 160 or so plus s/h maybe depending on where i found the stuff online... but then i dont have a welder LOL

Its still no V8, but for a 6 cyl it sounds pretty damn aggressive!! That said, my buddy with an f150 V8 (stock exhaust) is headed down to the same muffler shop soon because my "import" 3.5L made his truck sound like a girl tonight :D

NCSlice said:
All my knife pics are on photo bucket, and most I deleted from my phone. I guess I can start imager or whatevs...its still not working with the app or web.
Click to expand...

I had photobucket the longest but once they started asking for my money i switched to flickr and have been very happy with them. On the desktop computer they have no flaws i have came across.... On the phone.... Uploading from my phone through the app is simple, but getting the right codes require me to go to the full desktop site, still through my phone so its not that big of a deal... but i wish i could get the code from the app... Maybe i just cant find it too though :)



Couple pics of the truck.... Loving this thing!!
25217535251_023e711d29_c.jpg


Threw a 31.5" cali-raised 3d LED in the lower grille.
25192285502_641873e690_c.jpg


The new rumble maker
24761165164_9c39453dc7_c.jpg


25095588870_980f59f20a_c.jpg


Got these decals made up, but they'll be coming off. Having them tweeked just a little but they'll be back on... Prolly around the time the new spartan grille is finished. I hope LOL
24904846690_9bb52113c9_c.jpg
 
bigghoss said:
The nice thing about working nights is that there's no wrong time to start drinking.
Click to expand...

Only down side is not being able to drink a beer with dinner/breakfast(?) Before work.

KingMC said:
Drinking when the sun comes up sounds pretty awesome
Click to expand...

It is nice having some Kracken when I get home at 0620.

KingMC said:
I'm telling you, imgur is the way to go. I have yet to have any issues with them so far, very fast load time and a much cleaner interface compared to photobucket.
Click to expand...

Photo bucket is really starting to piss me off.
 
The ads on photobucket hang and or crash firefox for me lol. I still use it, not too many issues with it so far.
 
Nice WW! It'll be really sweet once that grill is set! Digging the rims, I'm looking at solid black as well. Something about blacked out rims and big black tires that I like.

Photobucket's finally working...

Ka-Bar 1461 Impact Spearpoint D2!
My river Knife...



Lighting gives a different look...



Full solid tang...



This thing has some heft to it with that solid tang. Someone put a reeeeaaal nice edge on it. Boy, I'm a happy camper!

I'll do a write up on the Ka-Bar sub
 
TBL said:
The ads on photobucket hang and or crash firefox for me lol. I still use it, not too many issues with it so far.
Click to expand...

I haven't tried it on PC, but the phone app is waaayyyy better than the browser version when using a droid. The ads kill the browser but barely any on the app. Just a little thingy at the bottom. Almost like they don't want you to use the browser version.
 
Hrm thanks for that. I've notice that with many other apps that I use. Its almost like they want you to live off your phone instead of the computer ;) It is sooo much easier tho! no downloading of photos from your phone to your comp... just straight upload. Oh technology!
 
And you can select multiple pics to link instead of back and forth one at a time, that's what prob hooked me the most
 
Stupid air conditioner drain line developed a leak tonight. Tried to fix it. Just moved the leak to where I'm going to have to call in a pro.

I blame Leap Day.

Maybe I can stay at TBL's while he soaks up some Florida sun.
 
Last edited:
NCSlice said:
What? That's an easy fix...is it in the Attic?
Click to expand...
Yes it's in the attic and should have been an easy fix but in the process of working on the line I seem to have cracked the pan under the coil.

But I'm totally open to suggestions.
 
Last edited:
DunkEm said:
Yes it's in the attic and should have been an easy fix but in the process of working on the line I seem to have cracked the pan under the coil.

But I'm totally open to suggestions.
Click to expand...

Move somewhere where you don't run A/C in FREAKIN' FEBRUARY!! [emoji3]

Sheet metal pan? For drain pans I've used the 2 part epoxy sticks (like jb weld) with good results. The pans don't hold any pressure, so as long as the crack is too wide it should work...marine epoxy would probably be even better.
 
Aikiguy said:
Move somewhere where you don't run A/C in FREAKIN' FEBRUARY!! [emoji3]

Sheet metal pan? For drain pans I've used the 2 part epoxy sticks (like jb weld) with good results. The pans don't hold any pressure, so as long as the crack is too wide it should work...marine epoxy would probably be even better.
Click to expand...

I'd agree on the move....but I'd have to go solo. The wife thinks it's too cold here. [emoji15]

Thanks for the epoxy suggestion. I'll look into it tomorrow. I'm done in the attic today.
 
Sorry about the stuff on the PS4 messing up tonight, Slice. Not sure what the problem was with voice chat. Looked it up and the only thing I could really find was exit and re-enter the party or the old "turn it off and back on" method. We'll have to test those (again :D) next time. :p
 
i used a parange to keep my property clean

i came home with ticks

mother frakkers

it wasn't even March!

the winds right now are EPIC

OMG

seriously, wow.
 
Status
Not open for further replies.
Back
Top