The Les George Knives Thread

Talos Taco Tuesday

3X4Sl0.jpg
 
norcalAF said:
I'm a PM for a nationwide carport/solar support structure and RV and boat storage canopy company. Plus I dabble a little bit in the military doing the weekend warrior deal 😁 hope that explains my warped sense of humor 😂
Click to expand...
yep a 👷‍♀️....
 
WhoMe? said:
View attachment 3103231

Might as well post here too. Today’s carry, along with a Salt LW LC200N Wharnie.

Quick question— Are there aftermarket sheaths for the Magnate readily available? Thanks.
Click to expand...
You might see if Chattanooga can make them, they do a lot of stuff for LG and D7. But I don't know of any off the shelf options. I will say the kydex they come with is very nice.
 
WhoMe? said:
View attachment 3103231

Might as well post here too. Today’s carry, along with a Salt LW LC200N Wharnie.

Quick question— Are there aftermarket sheaths for the Magnate readily available? Thanks.
Click to expand...
I'm a big fan of the JRE Model K. I found it to have great retention with the Magnate. You should be able to find one for under $50. They also have some optionality to them if you prefer a dangler or a firesteel loop.

I couldn't find a picture of my Magnate in the sheath, but here it is holding a similarly sized Model 2:

1000043422.jpg
 
Last edited:
norcalAF said:
You might see if Chattanooga can make them, they do a lot of stuff for LG and D7. But I don't know of any off the shelf options. I will say the kydex they come with is very nice.
Click to expand...

I’ll check them out. Thank you. I’ve got BB making me one for the Emmett. Agree the sheath is very nice but I want more attachment options. I do have a mini Tek Lok coming that may work out. I don’t like how the large sits for vertical carry.

Necroanax said:
I'm a big fan of the JRE Model K. I found it to have great retention with the Magnate. You should be able to find one for under $50. They also have some optionality to them if you prefer a dangler or a firesteel loop.

I couldn't find a picture of my Magnate in the sheath, but here it is holding a similarly sized Model 2:

View attachment 3103339
Click to expand...

I also like having multiple sheaths. I’ll check them out. I actually think I read about the JRE option online but forgot. Thank you too.
 
Since it’s Talos week, I figured I’d share a fun pair from the collection.

Up top is a 2014 V1. I can’t say with certainty that it’s the only Morph-milled V1 with a DLC blade, but I’ve never come across another example.

On the bottom is a V2 with Aztec lasering that I picked up directly from Les at Blade Show Texas 2025.

Always cool to see how the model evolved from the early days into current era.

20260212_100303.jpg

20260212_100414.jpg
Clip side shot to appease the wrathful P pnclbell . I had the Xenomorph one lasered for thematic reasons 👽. Les had Chaos clips at CanCon ’24, and Smythes_Knives Smythes_Knives and I were each lucky enough to snag one.
 
Last edited:
Necroanax said:
Since it’s Talos week, I figured I’d share a fun pair from the collection.


Up top is a 2014 V1. I can’t say with absolute certainty that it’s the only Morph-milled V1 with a DLC blade, but I’ve personally never come across another example. Keep in mind that the V3 VECP didn't appear until a year later. At the time, if you wanted a milled midtech from Les, your options were limited to a very small handful of ESVs and a couple of rare iterations of the Talos.


On the bottom is a V2 with Aztec lasering that I picked up directly from Les at Blade Show Texas 2025.


Always cool to see how the model evolved from the early V1 days into current era.

View attachment 3103898

View attachment 3103899
Clip side shot to appease the wrathful P pnclbell . I had the Xenomorph one lasered for thematic reasons 👽. Les had Chaos clips at CanCon ’24, and Smythes_Knives Smythes_Knives and I were each lucky enough to snag one.
Click to expand...
EPiC. 😍 🖤🩶🖤
 
Necroanax said:
Since it’s Talos week, I figured I’d share a fun pair from the collection.


Up top is a 2014 V1. I can’t say with absolute certainty that it’s the only Morph-milled V1 with a DLC blade, but I’ve personally never come across another example. Keep in mind that the V3 VECP didn't appear until a year later. At the time, if you wanted a milled midtech from Les, your options were limited to a very small handful of ESVs and a couple of rare iterations of the Talos.


On the bottom is a V2 with Aztec lasering that I picked up directly from Les at Blade Show Texas 2025.


Always cool to see how the model evolved from the early V1 days into current era.

View attachment 3103898

View attachment 3103899
Clip side shot to appease the wrathful P pnclbell . I had the Xenomorph one lasered for thematic reasons 👽. Les had Chaos clips at CanCon ’24, and Smythes_Knives Smythes_Knives and I were each lucky enough to snag one.
Click to expand...
love when y'all show us the super rare stuff. those are great.
 
You must log in or register to reply here.
Back
Top