Whacha Been Up To......

Robocarullo said:
I’m just finishing up sheath number two. I’m liking the diamond chisels way better than the flat .This one went a lot smoother than the first one (almost no swearing.). I have some tidying up to do and I’m still trying to decide on which finisher to use (leaning towards leather balm with Atom wax). Overall, I think it turned out pretty well, I’m not crazy abou
the belt loop, I will definitely be focusing more on that for the next build. The fit and retention are very good, I will be putting this one to use.

AP1GczO5aFLVb-o8DJ2RT_d5UzZg5I4nmUezRlrZLwM9vlSzkjxcZ_nb1E9rLCapqu42zpcuUPOyP2_vjD0WHzGutGKBS3L9pxZNUjhiSA8Xw0inmap9fKujV-fkSucamwFHNxUZ88tqkUShfttpgjIoJKfd=w1128-h846-s-no


AP1GczOUISfQk5vHQfEosDRmXueoYujt9dHefMqTtAS-ucb08xlwAfbqbho1_GpbORFJvFkdMrhHi54lGHjemllW7ANh5eDQtzV79susLPuVQZcyRpOGMkBbo0Gx-V3xq45CFbzBTFqH5BCxYaxKD2RBzpOV=w1128-h846-s-no


AP1GczM64xKEIqM53PxE2TWejTcziJAfmK33zzuGRkzf-oHkGmAvDiK68WwR6tPEC5hRANyEmgv800Tky3acclrrUmkYuANidv64wUUxwy86Dk-yJiJEnJ900lJveLyWjmVnY9XGkVRs7BpMdpm2tQ9s3SFG=w1128-h846-s-no
Click to expand...
Fine job.....👌
 
Last edited:
Thanks, on the embossing I put two coats of bag kote and carefully using a small artist brush dyed around with black dye. Afterwards I used a mixture of bag kote and black highlighter to brush into the embossing to bring out the details
G2
 
Robocarullo said:
Sheath #3. I’m working through my blades with no sheaths. Just finished this one for my SRKW Galley Rat. Rather than use a patch, I countersunk the snap this time. Not the greatest leather but I’m working through it.


AP1GczM4FQiyWolJSFNHZReyMWukInxTIUwyKPpNXNrb7ZGsETAB_nDUI4ddd3LbLLVXZsuPq8GHdrJr6QfeM7k3bbY60xYl005FfNxiTLa_-jIMzvOQr-vtA1cG4mkC8-jCjLQGNQs30PCIRaIPyB8ptrEB=w1128-h846-s-no


AP1GczPRAmkxfYuMlToayLjFOBpf6KRRKk394TwiGwle0HL1T4QKi_Lg11CmcEPSO4KBEOs6Z90QWwET_F4SoCOIl5Yl9RMxbqJSIT2IvbQ4HAr2KAFGu7JBLOJ80HjRyKR0rjceZbdrkwkBFweBsGArecgT=w1128-h846-s-no


AP1GczPWAcAKcPnMDfLEmbrkyXUD-Idu1djVujDW39NJjwnFwUWT50NWrxesNImKsnoFlAW1U85dtQDc1cpJSQmzjXODgg1i56j9bT3o8nOBfF6nx6wZWb3zcJZM_eIsrtSnhYqUciUKLERWOchV3UtZmaLa=w1128-h846-s-no
Click to expand...

Nice job......
 
Finished up my first mechanics/musicians belt. I’ve been wearing one like this for years and knew I wanted to make myself one once I got comfortable making belts.
The 3D printer saved me from having to order and wait for a pattern.
I’ll definitely be making more of these in the near future!
IMG_6974.jpeg
IMG_6972.jpegIMG_6973.jpeg
 
You must log in or register to reply here.
Back
Top