GEC Fixed Hunters H10, 50 & 60

[hamsco]

If one were so inclined, where would you find an H10 for purchase?

I sent you a visitor message. Let me know if you did not receive it.

 

[arizonaranchman]

I've admired these H10 fixed blades for awhile so finally had to try one out. It just arrived today and I'm really happy with it's design and also the sheath appears to be well designed. :thumbup:

 

[hamsco]

Very nice. 1095 and the Acorn on the Mank (to show when in the sheath).

 

[arizonaranchman]

Very nice. 1095 and the Acorn on the Mank (to show when in the sheath).

I'm very pleased with it. This is a SMALL knife though, but just what I wanted to fill a niche that my other fixed blades don't as they're bigger.

 

[Jeff Mitchell]

For Stag Saturday
I got a #60 today. GEC made 18 in 2007, and one in 2009.
No date on the tube end, or the knife. It's a nice size.
It was sent with this later sheath. Which it fits OK.

Hey Hamsco,
Do you know if this one is from 2007 or 2009? I have a GEC that should be from 2007, but it has no acorn.

 

[Travman]

They have been in the shadows for too long.

 

[black mamba]

I've been fortunate to snag a couple of these, one the smaller H10 and the other a larger #50.

 

[Jeff Mitchell]

Here are a couple H10s next to a Case 557. The top H10 is like Travman's from 2018 I think and the bottom one is from 2021.

 

[euroken]

Would anyone know the size difference between the GEC fixed models? e.g. H10, H20, H30, H40, H50, and H60?

Don't mean to post another variation than what was listed on OP, but here is a H40 for reference:

Overall: 8.375"
Blade: 4.5"
Handle: 3.875"

 

[Elgatodeacero]

my H40 has a blade of about 4 and 1/4 inches and a cutting edge of 4.

I think the H10 is 4.5 inches cutting edge, and the H50 is 5 inches, and the H30 is 3.5?

I have not seen an H60………. we need an H70 Bowie

This thread should include H40’s and 20’s and 30’s also!

 

[black mamba]

I have two H10s which both have identical measurements of blade (front of guard to tip) 3.53" and handle (including guard) 3.49" for 7.02" OAL.
My H50 has a blade measurement of 4.43" and handle of 3.98" for 8.41" OAL.

 

[jmh33]

 

[Travman]

My first H30. Jigged Frontier bone.