Guardians of The Lambsfoot!

Crisis averted today, I was in a panic getting ready for work today, my Lambsfoot wasn’t were it should have been. I looked everywhere and couldn’t find it, everyone here knows that feeling in the pit of your stomach when you lose a knife. I had to leave for work without it but my Granddaughter knew what was going on. A few minutes ago I received a text from her “found it”.
upload_2020-8-21_7-56-1.jpeg
she’s a great kid one day it will be hers.
 
Thank you for the kind words on my Ebony Lambs and my photo Jack! I love all my Lambs, but I’ve developed a soft spot for my Ebony Lambs in general. It looks as though your mate has his tool stall well stocked! I hope you and David @donn have a terrific visit Jack! Has David had hands on a Charlie Lambsfoot before? If not, I bet he’ll be impressed! :thumbsup: My best to you both for a great weekend! :) :thumbsup:


Looking good Bill! You and your Hartshead have a great day! :) :thumbsup:
Thanks Ron. Hope your day goes well too.:)
 
Crisis averted today, I was in a panic getting ready for work today, my Lambsfoot wasn’t were it should have been. I looked everywhere and couldn’t find it, everyone here knows that feeling in the pit of your stomach when you lose a knife. I had to leave for work without it but my Granddaughter knew what was going on. A few minutes ago I received a text from her “found it”.
View attachment 1403300
she’s a great kid one day it will be hers.
That one earned a big ole :D Chuck! :thumbsup: :thumbsup: :cool:

Thanks Ron. Hope your day goes well too.:)
:D :thumbsup:
 
Speaking of tools:
CKeewvn.jpg
 
That one earned a big ole :D Chuck! :thumbsup: :thumbsup: :cool:


:D :thumbsup:
Ron you are so right there, i guess it's so silly to be upset over something like this, but we have all been there. i lost a wire frame Jack knife going on 30 years ago and i still get upset over that one. i can always count on my granddaughter though, she likes traditional knive as much as i do, not expected from a 12 year old.
 
Good morning Guardians, I'm up with the birds today. Heck, I'm up before the birds this morning:D. Got a busy day and need to get an early start.
View attachment 1403267

Hope your day goes OK Bill, great colours on your Hartshead Barlow :cool: :thumbsup:

Thank you for the kind words on my Ebony Lambs and my photo Jack! I love all my Lambs, but I’ve developed a soft spot for my Ebony Lambs in general. It looks as though your mate has his tool stall well stocked! I hope you and David @donn have a terrific visit Jack! Has David had hands on a Charlie Lambsfoot before? If not, I bet he’ll be impressed! :thumbsup: My best to you both for a great weekend! :) :thumbsup:


Looking good Bill! You and your Hartshead have a great day! :) :thumbsup:

I can understand that my friend :) Yeah, he packs a lot onto that little stall. Before the lockdown, when he could get hold of stock more easily, he had even more :thumbsup: Thanks again Ron, I have just got back. It was great to see David, but two very long bus journeys, wearing a mask, turned it into quite an ordeal, and it rained almost all the time I was in Harrogate. David had to contend with heavy traffic, and it'll probably be even worse for him going back. We didn't have time for much else apart from a chip butty, hastily eaten, while we sheltered from the rain, but David got his hands on my Charlie Lamb for a few minutes, so I'll leave him to give his impressions :) Have a great weekend yourself pal :) :thumbsup:

I’m Back in Black for Friday! Y’all be safe out there and have a blessed weekend! :) :thumbsup:

50236335946_651f44b6d8_c_d.jpg

Looking good Ron :) :thumbsup:

Crisis averted today, I was in a panic getting ready for work today, my Lambsfoot wasn’t were it should have been. I looked everywhere and couldn’t find it, everyone here knows that feeling in the pit of your stomach when you lose a knife. I had to leave for work without it but my Granddaughter knew what was going on. A few minutes ago I received a text from her “found it”.
View attachment 1403300
she’s a great kid one day it will be hers.

Great stuff Chuck :) Phew! :eek: :thumbsup:

Speaking of tools:
CKeewvn.jpg

Very handy Jer :thumbsup:

Ron you are so right there, i guess it's so silly to be upset over something like this, but we have all been there. i lost a wire frame Jack knife going on 30 years ago and i still get upset over that one. i can always count on my granddaughter though, she likes traditional knive as much as i do, not expected from a 12 year old.

I lost a knife nearly 50 years ago, and it still irks me! o_O :rolleyes: That's nice about your granddaughter :) :thumbsup:
 
I can understand that my friend :) Yeah, he packs a lot onto that little stall. Before the lockdown, when he could get hold of stock more easily, he had even more :thumbsup: Thanks again Ron, I have just got back. It was great to see David, but two very long bus journeys, wearing a mask, turned it into quite an ordeal, and it rained almost all the time I was in Harrogate. David had to contend with heavy traffic, and it'll probably be even worse for him going back. We didn't have time for much else apart from a chip butty, hastily eaten, while we sheltered from the rain, but David got his hands on my Charlie Lamb for a few minutes, so I'll leave him to give his impressions :) Have a great weekend yourself pal :) :thumbsup:

Looking good Ron :) :thumbsup:
Thanks Jack! :) Even a short visit with a good friend has to better than no visit at all during these times! ;) :thumbsup:
 
I've taken to wandering round my mate's tool-stall ;) :thumbsup:
And why wouldn't you!!! That is a tool stand, lots a cool stuff:cool: There is not enough of them left anymore, they are much better than the multi national conglomerates, so enjoy those stalls while they are left my friend.:D British made spanners for a quid, that is if my eyes are not failing me.:oops: Have a good weekend, mate,:thumbsup:
 
I wanted to share this updated family portrait of my Ebony Lambsfoot knives with y'all! :) :thumbsup:

50247284878_520b54588a_c.jpg

Quite a crew! :cool: :thumbsup:

I've taken to wandering round my mate's tool-stall ;) :thumbsup:

MXVdW9w.jpg


AdspXKP.jpg

Nice to see photos of the famous tool stall, Jack! :thumbsup: Looks like the kind of place a guy could spend a fair amount of time digging around for treasures. :D

Good Morning Guardians, hope everyone has had a good week :) Circumstances have given me the opportunity to meet up with @donn today, for a couple of hours, so I'm looking forward to that, in spite of the rather miserable weather here. To celebrate I'm having a Double Lambsfoot Day ;) Have a good Friday Guardians, the weekend is almost upon us :) :thumbsup:

9qe9Wwv.jpg


1g5teQz.jpg

I can understand that my friend :) Yeah, he packs a lot onto that little stall. Before the lockdown, when he could get hold of stock more easily, he had even more :thumbsup: Thanks again Ron, I have just got back. It was great to see David, but two very long bus journeys, wearing a mask, turned it into quite an ordeal, and it rained almost all the time I was in Harrogate. David had to contend with heavy traffic, and it'll probably be even worse for him going back. We didn't have time for much else apart from a chip butty, hastily eaten, while we sheltered from the rain, but David got his hands on my Charlie Lamb for a few minutes, so I'll leave him to give his impressions :) Have a great weekend yourself pal :) :thumbsup:

Jack, that’s cool that you were able to meet up with David. I hope you both had an enjoyable visit (despite the poor weather and travel frustrations). :thumbsup:
 
And why wouldn't you!!! That is a tool stand, lots a cool stuff:cool: There is not enough of them left anymore, they are much better than the multi national conglomerates, so enjoy those stalls while they are left my friend.:D British made spanners for a quid, that is if my eyes are not failing me.:oops: Have a good weekend, mate,:thumbsup:

Yep, British-made (Sheffield) spanners for £1! :eek: His prices are always good, I've had some great bargains over the years :) Thanks mate, you too :thumbsup:

Nice to see photos of the famous tool stall, Jack! :thumbsup: Looks like the kind of place a guy could spend a fair amount of time digging around for treasures. :D





Jack, that’s cool that you were able to meet up with David. I hope you both had an enjoyable visit (despite the poor weather and travel frustrations). :thumbsup:

Yeah, there's a high turnover Barrett, all sorts of interesting bits and pieces :thumbsup:

Thank you my friend, I hope David got home OK :) :thumbsup:

Today’s mail. First thing Monday, I will present myself at the courthouse to apply for my guardianship papers....No? Is that not right?

View attachment 1403867

Glad your Yorkshire Day Giveaway prize made it Henry :) Your photo clinches your membership, welcome to the Guardians :) Hope you like the Lambsfoot pattern as much of the rest of us do :thumbsup:
 
Good Morning Guardians! Hope everyone is doing OK. No hike for me today I'm afraid (a combination of poor weather and other commitments), but I'm sure I'll still have a use for my trusty Hartshead Barlow. Have a great weekend Guardians :thumbsup:

6QuN0iz.jpg
 
Good Morning Guardians! Hope everyone is doing OK. No hike for me today I'm afraid (a combination of poor weather and other commitments), but I'm sure I'll still have a use for my trusty Hartshead Barlow. Have a great weekend Guardians :thumbsup:

6QuN0iz.jpg
Your trusty HHB just keeps getting better and better. The colors of your stag covers are maturing nicely my friend:thumbsup::thumbsup::thumbsup:
 
Back
Top