N.E.C.K.A. Hammer-In Schedule

happycat said:
Larry, IG etc. My regrets. Won't be able to make it this weekend after all. Larry sorry about not being able to bring a vise up for you.
Hope you all have a great time.
I hope to be able to make it out there for the next one.
Ed
Click to expand...
:(
dang ED what's up..?
OK lets fill that #19 spot Higgy ?
1 GRASSHOPPA
2 CHEEESEL
3 BBBBB BEAVER
4 JERRY ADAMS
5 DAN GRAY
6 LAMONT C.
7 DAVID PRATT
8 DAVID SYLVESTER
9 RICK KILPATRICK
10 JAY MULCAHY
11 PAUL CARLSON
12 PAUL SABIN
13 ALLIN KAHEL
14 JOE CABAUP
15 D SUITOR
16 RENE ROY
17 JIM SISKA
18 BRAIN COLBY
19 HIGGY?????
20 KOOK
21 MIKE THE MICK
22 J. NEILSON
23 ED WILSON
24 MARCEL MORIN
25 BILL VINING
26 MACE VITALE
27 ALDO
28 JAY BOYNTON
29 PETE K.
30 NORM HARVEY
31 ARTIE REBELLO
32 SEAN WEDDEKE
33 STU MASON
34 GEORGE DAILEY
35 GrassHoppa's Friend
36 GrassHoppa's Friend
37 G. Dailey's Freind
38 Dude in Blade Mag.Friend
39 Dude in Blade Mag.
 
updated list
1 GRASSHOPPA
2 CHEEESEL
3 BBBBB BEAVER
4 JERRY ADAMS
5 DAN GRAY
6 LAMONT C.
7 DAVID PRATT
8 DAVID SYLVESTER
9 RICK KILPATRICK
10 JAY MULCAHY
11 PAUL CARLSON
12 PAUL SABIN
13 ALLIN KAHEL
14 JOE CABAUP
15 D SUITOR
16 RENE ROY
17 JIM SISKA
18 BRAIN COLBY
19 BRAIN COLBY's Dad
20 KOOK
21 MIKE THE MICK
22 J. NEILSON
23 MARCEL MORIN
24 BILL VINING
25 MACE VITALE
26 ALDO
27 JAY BOYNTON
28 PETE K.
29 NORM HARVEY
30 ARTIE REBELLO
31 SEAN WEDDEKE
32 GEORGE DAILEY
33 GrassHoppa's Friend
34 GrassHoppa's Friend
35 G. Dailey's Freind
36 Dude in Blade Mag.Friend
37 Dude in Blade Mag.
 
George, Can you email me or post some directions....cant seem to find the ones I had.
Also....will you be needing me to bring an anvil and forge? Do you think we will need it?
Thanks
Mace
 
I'm glad I'm not the only one that can't remember where I've been :D

got JDM5160 steel today :D I know two of you want some

any others want me to bring some..? and how much of it.? :)
 
Dan Gray said:
I'm glad I'm not the only one that can't remember where I've been :D

got JDM5160 steel today :D I know two of you want some

any others want me to bring some..? and how much of it.? :)
Click to expand...
Dan, How much are they$$$$????
Hell!!! You can't remember where you been and the other half of the time you can't remember your own name. :rolleyes: :p :D
 
From Boston
Get to 24 South then 140 South to the end at light take a left on Route 6 / Kempton St. this is heading east. Go thru all the traffic lights after the last light it is 2 to 3 miles down the road. When you get to the first stop sign. Take a right this is Chancery St. then take the second right at the light green house this is Elm St. I am 358 3rd house from the corner.
From Conn.
Take 95 east to 195 east 140 South to the end at light take a left on Route 6 / Kempton St. this is heading east. Go thru all the traffic lights after the last light it is 2 to 3 miles down the road. When you get to the first stop sign. Take a right this is Chancery St. then take the second right at the light green house this is Elm St. I am 358 3rd house from the corner.

Cell 508 951 2719 home 508 999 7090

:D :D
 
HAMMER-IN AGENDA

DEMO TIME LOCATION DEMONSTRATOR
Cable Damascus 9:00 to 10:00am smithy GrassHoppa

Forging 10:00 to11:00am smithy Mace
Grinding 10:00 to11:00am cold shop Jim Siska

Leather Work 11:00 to lunch cold shop Dan Gary (hehehehe!!!)
Canister 11:00 to lunch smithy IG

Lunch will be having open discussion, show and tell and nomination and elections of officers and BOD

Starting after lunch competitions and open shop. Will have NECKA T shirts for winner's

If you have any question on the following as the person in the demonstrators column
If you have any question feel free to ask or like to see something done.
Kydex Cheeesel (Joe Brum)
Stabilizing IG
Heat Treating IG or Dan Gray
Damascus IG
 
:eek: heat treating too :eek: haha
$2.50 a pound IG. i'll mark them.

you know... a vote should be done on line and by mail, not all members will be able to vote there, they won't be there...and they have the right to .... just a thought ;) ,, I get to have one more thought today :D see you tomorrow about 9-9:30 .. got to leave here at 3:30 AM aahhhhhh
 
UPDATED
1 GRASSHOPPA
2 CHEEESEL
3 BBBBB BEAVER
4 JERRY ADAMS
5 DAN GRAY
6 LAMONT C.
7 DAVID PRATT
8 DAVID SYLVESTER
9 RICK KILPATRICK
10 JAY MULCAHY
11 PAUL CARLSON
12 PAUL SABIN
13 ALLIN KAHEL
14 JOE CABAUP
15 D SUITOR
16 RENE ROY
17 JIM SISKA
18 BRAIN COLBY
19 BRAIN COLBY's Dad
20 KOOK
21 MIKE THE MICK
22 MARCEL MORIN
23 BILL VINING
24 MACE VITALE
25 ALDO
26 JAY BOYNTON
27 PETE K.
28 NORM HARVEY
29 ARTIE REBELLO
30 SEAN WEDDEKE
31 GEORGE DAILEY
32 GrassHoppa's Friend
33 GrassHoppa's Friend
34 G. Dailey's Freind
35 FIREBALL HEAT TREATING
 
HEEEHAW!!!!! The day is here. All that is left to do is setup work forges, move anvils, chairs and tables. :D :D :D
 
had a great time today at the hammer-in. Thanks to Lamont and Dan I also found as easier way to get home than going through all the traffic in Boston. George, thanks again for a great time. Jim Siska and the others all gave really good demos . I think we all left there with more than we had when we arrived. George, who won the cutting competition? Thanks again.

Marcell
 
Guys Had a great time. You guys rock. It was great to meet everybody and see some awesome demos talk to some great makers and learn a ton. Not enough time to see all the demos but what I missed I'll catch next time. Thanks to all who made it possible and thanks to Joe for the invite can't wait for the next one.
Sean :D
And if I had known dog were OK
DSC02111.JPG
 
Sean we said dogs not horses :eek: :eek: :D Bring them next time. Jaguar needs to be put in his place, because he keeps beating up Ferrari and Viper :D
 
thanks to everyone for showing up. and thanks to all who helped demonstrate, cook, donate raffle material, and set-up. it was a hell of a turn out. and a huge thanks to IG for holding it at his place again. hope you all got home safe, :D
 
Just wanted to chime in to say thanks to I.G and all the other folks that made the Hammer In happen. Great bunch of guys who are more than willing to teach you everything they know. It was my first time seeing anything coming out of a forge and I must say, I had a great time. I even got to make a few billets for myself thanks to Mike Spangler and I.G. I singed some eyebrows, blistered a few fingers and burned a big hole in my jacket in the process. Where else could you have that much fun! Great demos, great people, what more can you ask for.

Thanks again to all.

Bill
 
yes thanks all that showed up
I had a great time too.. I hope the guys liked the Leather demo,
I was missing some of my tools and I was out of my element but it went OK I think. normaly I don't do and talk at the same time,, I'll blaim any thing wrong on that :D :D
I got home just at mid-night..some pooped too...rain all the way. :( .
 
IG's you ole dog you, as Grasshoppa said, big thanks for even letting me into you yard,,,sshhheesshh :eek: .

Didn't get to see many demos, but I got some nice pics of Mace forging a blade. Definately learned a few things,,,like, damn that beer from Canada was good...all Canadian beer bottles have twist off tops.

Had fun participating in the cutting comp, it's a good learning experience. Next time I'll have a new knife, more weight better edge geometry, might even put a real handle on it :confused: .

As always a person hangs out with some very interesting characters when they meet at IG's :D

Larry T

Member of NECKA & NCCA
 
Just started playing around with the damascus I made at Hammer In yesterday. Ground into a bit and have it a quick etch.

first_bar.jpg
 
You must log in or register to reply here.
Back
Top