SG2 steel Red Flag!

Status
Not open for further replies.
I have been out of work for 10 days due to the holidays.
It is not like I could really go back in on Wednesday and expect to have time to take personal pictures. And to boot it seems the battery charger for our work camera is misisng in action, no one seems to know what happened to it. I have been unable to take photos of anything, even those my boss wanted me to take. Hopefully they will remedy this situation next week.
My camera is toast, S.O. dropped it a couple of weeks ago. I am not going to replace it, as it will just happen again. If pictures appear, it is from my work camera. Right now all 4 of the knives are locked in my desk awaiting a fix to the dead battery situation. Our work camera is old and out-dated, needed replacing years ago, but they will not do it. Maybe the lost charger will convince them to do so soonest.
To boot I am unable to access this site at work because it is "weapon related." When I can get the pics I will post them.
What a mess.
 
cbxer55 said:
I have been out of work for 10 days due to the holidays.
It is not like I could really go back in on Wednesday and expect to have time to take personal pictures. And to boot it seems the battery charger for our work camera is misisng in action, no one seems to know what happened to it. I have been unable to take photos of anything, even those my boss wanted me to take. Hopefully they will remedy this situation next week.
My camera is toast, S.O. dropped it a couple of weeks ago. I am not going to replace it, as it will just happen again. If pictures appear, it is from my work camera. Right now all 4 of the knives are locked in my desk awaiting a fix to the dead battery situation. Our work camera is old and out-dated, needed replacing years ago, but they will not do it. Maybe the lost charger will convince them to do so soonest.
To boot I am unable to access this site at work because it is "weapon related." When I can get the pics I will post them.
What a mess.
Click to expand...

You should understand that this does not looks good. This is second time you did not deliver your promise and this excuse is outdated a bit - it is Friday and you promise to give us your prove Wednesday. This all make it harder and harder to believe you.

Well, I hope you will find a way to make and post pictures.

Thanks, Vassili.
 
cbxer55 said:
To boot I am unable to access this site at work because it is "weapon related."
Click to expand...

You're not allowed to access a "weapons related" website but you're allowed to bring this?
cbxer55 said:
BTW, this is my usual EDC.
Kimber .45, NAA .32, two Benchmade Rukus, Leatherman Charge XTi, Surefire U2.
70d9ec2af5a431c41aed7f1ea7788be40_large.jpg
Click to expand...

Interesting rules at your job.
 
sixfoot7 said:
You're not allowed to access a "weapons related" website but you're allowed to bring this?


Interesting rules at your job.
Click to expand...


"This" was done at home. I do not take the guns to work, they stay in a locking container in my truck while at work. No one seems to have a problem with having blades at work, just cannot access certain sites. They are blocked by "Corporate".
And don't ya just love tham Benchmade Rukus knives.
Much better than any kershaw I have purchased.
That black Leatherman Charge still has a nice finish one year later, I use it every day for something or other.

Hmmm, wonder why the spring in my leek broke so soon?
icon_scratchhead.GIF

More of that wondrous kershaw quality?
icon_surp_eek.GIF
icon_eh.GIF
icon_surp_spock.GIF
 
nozh2002 said:
You should understand that this does not looks good. This is second time you did not deliver your promise and this excuse is outdated a bit - it is Friday and you promise to give us your prove Wednesday. This all make it harder and harder to believe you.

Well, I hope you will find a way to make and post pictures.

Thanks, Vassili.
Click to expand...


Personally I do not care whether it looks good or not.
Do not give a damn. When I am able to get access to a flippin camera that works, I will post the flippin pictures. Do not know when it will be. I am not buying a new camera for home use. When and if a charger is found for the work camera, I will take pics. If never so be it.
I am a
03cb6118cd22c8de5d44f507ffce0a090_medium.jpg
. Always ahve been, always will be. One thing about that, I do not care what anyone thinks about me or my flippin opinions. Y'all can all get stuffed.

Matter of fact, lets end this now. I am not gonna even bother with pics. You would all think they were doctored anyways. I do not believe half of what I see on the internet anymore. So easy to doctor up pics, I am really good at it. That is why I am supposedly in control of the work camera. I just cannot control where the flippin charger went, over the holidays when I was not there.

Y'all win. I am now gonna abondon the kershaw site indefinitely.
Thanks for the offer to replace the knives, Thomas. I'll keep them just the same, probably worth more with the defects than perfect.
I already gave away one of them, the rest will be gone this year. Cheap worthless gifts for someone who does not know any better.:thumbup:
 
A.P.F. said:
Yes sir!
marty.jpg


I can see how asymmetrical those grinds are.
Click to expand...

If I had eyes like those, I would not carry a .45 every day. I also would not qualify to be a inspector. I have to pass a vision test yearly to remain in my position.
 
cbxer55 said:
Personally I do not care whether it looks good or not.
Do not give a damn. When I am able to get access to a flippin camera that works, I will post the flippin pictures. Do not know when it will be. I am not buying a new camera for home use. When and if a charger is found for the work camera, I will take pics. If never so be it.
I am a
03cb6118cd22c8de5d44f507ffce0a090_medium.jpg
. Always ahve been, always will be. One thing about that, I do not care what anyone thinks about me or my flippin opinions. Y'all can all get stuffed.

Matter of fact, lets end this now. I am not gonna even bother with pics. You would all think they were doctored anyways. I do not believe half of what I see on the internet anymore. So easy to doctor up pics, I am really good at it. That is why I am supposedly in control of the work camera. I just cannot control where the flippin charger went, over the holidays when I was not there.

Y'all win. I am now gonna abondon the kershaw site indefinitely.
Thanks for the offer to replace the knives, Thomas. I'll keep them just the same, probably worth more with the defects than perfect.
I already gave away one of them, the rest will be gone this year. Cheap worthless gifts for someone who does not know any better.:thumbup:
Click to expand...

So now case is closed. There are no any proves of those claims. More then this he promised three times to provide proves and did not deliver those promises with those excises - one better then other...

Well, he did not make me turn my attention from Kershaw to Benchmade. Actually, I rather stay with Kershaw then be on same side...

Thanks, Vassili.
 
cbxer55 said:
Personally I do not care whether it looks good or not.
I do not care what anyone thinks about me or my flippin opinions.
QUOTE]


Then why did you start running your pie hole in the first place? This thread wasn't about you or your flippin opinions anyway, yet you took the time to voice your flippin opinions.

A little heads up...we don't give a flip about you, or your flippin opinions. If you don't like the knives, or think they're flawed, toss them in the nearest trash can...along with your flippin attitude and the link you've got to BF in your Favorites folder.

See ya!
Click to expand...
 
nozh2002 said:
More then this original poster promised three times to provide proves and did not deliver those promises with those excises
Thanks, Vassili.
Click to expand...

just to clarify, he wasn't the "original" poster, and I never wanted or needed to prove anything. But you'll have to scroll back through a crap load of pages to see what this was originally about.
 
Really unfortunate. We had a good thread going before he hijacked it. With any luck, the one honest statement he made will be his promise to play somewhere else.
 
OregonEdge said:
just to clarify, he wasn't the "original" poster, and I never wanted or needed to prove anything. But you'll have to scroll back through a crap load of pages to see what this was originally about.
Click to expand...

I did not mean you. I just should say "he". Let me correct my original post then. Sorry.

Vassili.
 
Yikes this thread is getting pretty ugly, might be time to lock her down (I'll talk with Tim). Not sure anything more constructive will come from all of this.
 
While it is still opened -
Why Kershaw makes low HG grind on SG2 knives (Blur & JYD II)? I think high flat grind is better. I like original JYD II blade shape more than SG2 one.
Is it related to this particular laminate specific?
 
work3 said:
While it is still opened -
Why Kershaw makes low HG grind on SG2 knives (Blur & JYD II)? I think high flat grind is better. I like original JYD II blade shape more than SG2 one.
Is it related to this particular laminate specific?
Click to expand...

now that folks, is a good question. a question that is actually a result of this thread and its purpose! oh my, who woulda thought it.

like i just said work3, good question. maybe it does have something to do with the laminate. wouldnt mind knowing myself.
 
Status
Not open for further replies.
Back
Top