SnaRKO outta nowhere!

Status
Not open for further replies.
tradewater said:
Nike still makes slides?
Click to expand...

They heard you wanted some, so they dare not discontinue them for fear of your wrath.



TMHunt said:
So, a story that some of you might get a kick out of. I have been bound and determined to finish my next brass back bowie before Blade. With everything else going on. I just got to it four days ago, I had all of the materials collected, but I litterally locked myself in the shop the last four days and strated from ground up. I got all the parts made, blade cut, ground, heat treated, brass spine set, S gaurd made, malicite and mokume spacers and curly maple handle made, totally assembled then came the finish work today. I thought I would make it, things where looking good. It has 32 gold and silver bezeled emeralds that im enlaying in the tang and brass spine, I machined all the holes and test fit the jewels only to find out that one of the emeralds I got was mislabeled and was the wrong size. That's right, im one emerald short of being able to finish it for Blade.
I hoping the supplier will be able to next day me one stinking 3MM emerald to my cousins house in Atlanta.........:rolleyes: ..........always sumthin.........
Click to expand...

daizee said:
a handful of glitter should do the job.

Good luck at Blade, Todd!
Click to expand...

Maybe there's some left over from the last BH gathering. Probably not though.
 
tradewater said:
Really? Wow, that's cool. I'm liking this. :thumbup:
Click to expand...

Yes, just one of the many obscure perks of being Tradewater. The Republic of Malta also has a holiday dedicated to you. The main even is a kayak parade where the participants get drunk and paddle down a stream flicking snakes at each other.
 
Bigghoss can't wear Nikes, he thinks they're too mainstream. He wears bedazzled cardboard shoes with fluffy faux fur sticking out the sides.
 
Hope you manage to take pics of that new brassback when you finish it, Todd, before someone snaps it up. Sounds like a real piece of art.
 
bigghoss said:
Yes, just one of the many obscure perks of being Tradewater. The Republic of Malta also has a holiday dedicated to you. The main even is a kayak parade where the participants get drunk and paddle down a stream flicking snakes at each other.
Click to expand...

I'm honored, but I think you're still my biggest fan. ;)
 
TMHunt said:
So, a story that some of you might get a kick out of. I have been bound and determined to finish my next brass back bowie before Blade. With everything else going on. I just got to it four days ago, I had all of the materials collected, but I litterally locked myself in the shop the last four days and strated from ground up. I got all the parts made, blade cut, ground, heat treated, brass spine set, S gaurd made, malicite and mokume spacers and curly maple handle made, totally assembled then came the finish work today. I thought I would make it, things where looking good. It has 32 gold and silver bezeled emeralds that im enlaying in the tang and brass spine, I machined all the holes and test fit the jewels only to find out that one of the emeralds I got was mislabeled and was the wrong size. That's right, im one emerald short of being able to finish it for Blade.
I hoping the supplier will be able to next day me one stinking 3MM emerald to my cousins house in Atlanta.........:rolleyes: ..........always sumthin.........
Click to expand...

Sounds like something Mr Biscuit should sport with his big magic hat. Ya gotta make him a matching grill..
 
61896.jpg
 
Damn fuel pump/labor went from 325 to $385....But its done.

It doesnt help that i have no idea the difference between a fuel pump and rhinoceros....

Ulf Krogstad said:
I'll still send you some funds for snail mail. PM sent. Thanks WW!
Click to expand...

Nothing needed brother i got you covered!

Noswad0208 said:
Thanks WW! Sent you an email since I can't PM.
Click to expand...

I didnt get it. If you sent it through the forum i may never get it. Sometimes it takes a few hours, its been more than a few though, sometimes i never get them that way... Lost in bladeforums limbo i reckon.

Try sharpmindz at live dot com
 
worldwood said:
Damn fuel pump/labor went from 325 to $385....But its done.

It doesnt help that i have no idea the difference between a fuel pump and rhinoceros....
Click to expand...

A pump moves liquid. Fuel is a flammable liquid that can be burned in an engine and used to do work. A fuel pump pumps that fuel from the fuel tank (a storage device for the fuel) to the engine where it can be used. Now you know, and knowing is half the battle.
 
worldwood said:
It doesnt help that i have no idea the difference between a fuel pump and rhinoceros....
Click to expand...

You don't have to. All you need to know is that if an auto mechanic tells you that your rhinoceros needs to be replaced, then you should find another mechanic. Or start riding your horse to the shop instead.
 
worldwood said:
I didnt get it. If you sent it through the forum i may never get it. Sometimes it takes a few hours, its been more than a few though, sometimes i never get them that way... Lost in bladeforums limbo i reckon.

Try sharpmindz at live dot com
Click to expand...

Yeah, Bladeforums email system is... well, bad. Sent it directly to the address this time. Thanks WW!
 
3rd equator crossing in the rearview, hello Southern Hemisphere!
 
Status
Not open for further replies.
Back
Top