The one and not only, but current, Pay it Forward Thread

Status
Not open for further replies.
As promised, below is a picture of some things I have to offer. Pick and choose whatever you want!



GONEI'm obsessed with gambling/gangster movies ("Ocean's 11", "Goodfellas, "Casino", ect.), so a family friend gave me a bottle of Caesar's Cologne. I've only used it twice: once for my grandfather's funeral and once for my sister's wedding. I love the smell of it, but sadly, I'm just a rough-n-tumble warehouse worker who doesn't know much about cologne and can't really find an excuse to use it. Perhaps a suit-and-tie or partying guy can get some good mileage out of it. Made in USA too, if that makes any difference :D

I've also got my last 2 pieces of black Paracord up for grabs. One piece is 26 inches long, the other is 23 inches. It's all the Paracord I currently have, but it would be perfect for a lanyard for a small knife or keychain.

GONENow, for the odd gift: 3 mini, industrial-strength magnets! I'm constantly knocking these pesky things off shipping units at work, which is nearly impossible even with a hammer. They are NOT your typical fridge magnets: these suckers are strong enough to keep a 200 lb rolling steel container shut and strong enough to stay magnetized through my hand. I've found tons of uses for them: paper-work clip, keeping glasses cases closed, name tage holder, needle and pin finder, magic tricks, you name it! I've got more of them to giveaway, but I thought I'd start off with 3 to see if anyone's interested first.


I figured I should take a picture of this seperately 'cause this will probably interest more people than the cologne, paracord, or magnets:


This is a slightly used standard Benchmade pocket clip with 8 Benchmade torx screws: 3 tiny, 1 medium, and 4 large. Perfect for someone who's lost a few screws on their Benchmade folders!

If anyone's interested in what they see, let me know. I'll ship to any of the 50 states. Awesome thread!:thumbup:
 
Last edited:
I have a couple knives I'd like to offer up but I don't have photo hosting and I can't accurately describe them, would anyone volunteer to host 2 photos for me if I email them to you? I have an unknown Vic SAK and an old '80's Case.
If someone could host them for me ether shoot me a quick email or just post up here and I'll email you. edit: photos will be hosted and knives will be posted tonight.

Mykel and Micah the modded Cryo and the sling went out, sector the light is going out tomorrow.
 
Last edited:
Kelly you bet! Alternatively I also have a pretty awesome German made high carbon steel Boker Copperhead you like high carbon blades. I just got it in but the member that I traded with threw in a bonus which I equally love pictured, going to clean up that Old Timey for my wife, I'm carrying a similar size pen knife myself so we have a his and hers!

Just let me know in an email your address and if you prefer the Boker below or the RR!

OT.jpg
 
cchu518, you have an e-mail inbound! I will have to check out what I have at home when I get off work today!
 
I promised myself that I'd participate in this thread once things pick up speed. I'll be in the "Give-first, take-later" club :)

1) [Claimed] Opinel No.6 Plain Carbon Steel - This was my first Opinel that was recently replaced by a No.8 Olive Wood. It made me realize the difference between my needs and wants. I want fancy folders with fancy steels and fancy locks. All I really need is a small, lightweight slicer. In other words, it saved me a LOT of money. It has an apple juice patina and a micro-bevel.

DSC_0150_zpsa46b33fa.jpg


2) [Claimed] Wenger Commander - Shout out to Kyui Su Kim here on the forums! He gave this to me as a bonus in a trade and really boosted my faith in the community. I really wanted to use this knife, but an Alox Farmer that I received in a giveaway has put the Weneger in the storage drawer. Shout out to spketch for the Farmer! As for the Wenger, the scales have a bit of "keychain rash", but the blades appear to have kept the factory edge.

DSC_0151_zps334dfa80.jpg


I think the rules of this thread state that the first "I'll take it" post here gets dibs (?) Well, let's stick with that :D
 
Last edited:
No Sir, it was first to go. And the multi-tool is history also.


Kelly Willis said:
Packna45, Is the buck nighthawk till available? If so, I will take it, I have a buddy deploying who could really use it.
I will have to look for some goodies to throw in the pot as well! Awesome Thread!!
Click to expand...
 
hickman1 said:
Well, if the trapper is spoken for, I'd like the Gerber parang that theAntihero offered up, I'd love to see how it does head to head with a HI khukri in clearing brush.

I'll offer up a Lansky system, I don't use it anymore now that I have the paper wheels.
Click to expand...

In case you missed it above:

SaintlyBrees said:
Whoever gets this Parang, PM me your address and I'll send you the matching sheath. [Edit: Sheath is new and unused.]
Click to expand...

;)
 
Hey all,

Haven't been able to catch anything yet, but I want to give for sure. I want to do more, but I at least know this is going. I need to clean out a few more boxes/drawers and I should find a few more items.

It is a Becker BK11, the old stamped style, not laser etched like the new version. It has been used as you can see, but not abused at all. The edge is in great shape. I stripped the blade so that's a lot of the look of "wear" on it. It is wearing a set of cocobolo scales. This is a great knife because not only is it a great cutter, but it also opens beer bottles! Haha.

image.jpg
 
hickman1 said:
Well, if the trapper is spoken for, I'd like the Gerber parang that theAntihero offered up, I'd love to see how it does head to head with a HI khukri in clearing brush.

I'll offer up a Lansky system, I don't use it anymore now that I have the paper wheels.
Click to expand...

Its still available and i sent you an email.
 
Micahdrake said:
Thanks so much for the Cryo! I have a very lightly used Gerber prodigy fixed blade knife, I love it, just simply no real use for it for me. If I find some other cool stuff I'll definitely return here!
Click to expand...

Id like the Prodigy if it still available!
 
Also, I have a Kershaw Clash up for grabs! Who's interested? 3 and 1/4" combo edge blade. Speedsafe fires hard, lock up is solid and the knife has only been used a handful of times. It's got decent heft and will make a great beater for someone out there. I'll post a pic when my Photobucket stops acting funky.
 
Status
Not open for further replies.
Back
Top