Guardians of The Lambsfoot!

[pjsjr]

I apologize for interruptinq the flow. I was hopinq to get an opinion. Feeling from the thread that a carbon steel blade is preferred has made me a bit self conscious. I watched a couple of YT Vids for testing. I cleaned the smaller pen blade, heated up some white vinegar, dipped part way and held over the cup. It did darken. I did nothing to the lamb foot blade. Am I correct in concluding that the blade is carbon? Thank you.
View attachment 1062530
View attachment 1062531

Yes, it is carbon steel. FYI, I have forced a patina with mayo, ketchup, and BBQ sauce in addition to vinegar. The results depend on how long you allow the material to stay on the blade.

Ah snow. I've read about the stuff.
I think I've seen that place before. Wasn't it a setting in The Christmas Story? That's the place where the kid got his tongue stuck on a pole.

That could have happened this morning if I wasn't careful were I put my tongue Preston

 

[Pàdruig]

Good day, Guardians.

I hope everyone had a terrific weekend. Back to the grind...

Such striking lighting you arranged for that particular knife, Dylan!

Sounds like a great time Dylan, and that is a beautiful shot my friend

Thank you, fellas. I usually wait for the sun to lower behind the trees a bit, usually makes for decent lighting but this particular horn benefits from just a bit of sunlight, I think.

I think I'll stick with bacon and eggs...

Well, I cannot argue with bacon. However... Proper made haggis is quite a treat. If you can get past the stigma of it, as well as the fact that it is partially comprised of organ meats (which I generally do not like), it can be very savory when prepared well.

Great photos and knives all!
FINALLY! Recieved my first lambsfoot this morning. Absolutely a beauty, with great chatoyancy, but..... it has a scratch.
So now the debate whether to live with it, or send it back

Poor photo, but this is it:
View attachment 1061274
View attachment 1061275

It's definitely a scratch, I can feel it with my fingernail.
How would you recommend buffing it out, I've never messed with horn before. White rouge on a buffer?

It took 6 days to get it in, so not too long.

Here's the pile side comparison. I didn't notice the small blemish around the bottom pin on the pile side till I took the photo, but I could live with that, since it is horn...
View attachment 1061291

I won't post pictures, but the horn handled peach pruner that Jack gifted me have a few marks that look like that. I can't feel them on the surface, and I assumed they were what would be called "inclusions" or "feathering" in a diamond. Basically, a natural imperfection in the material. Perhaps these lines are more visible in light translucent horn, compared to the dark, opaque stuff. If you move it around in the light, does it look like it runs deeper below the surface than a scratch that can be buffed out? Personally, I don't mind it, and think it gives the handle character, but as I said, they don't reach the surface, so I assume they are more stable. I don't know if it could cause cracking if the horn were to swell and shrink. (as horn is sometimes known to do with drastic changes in humidity)

Beautiful horn on that one, Dennis, defects and all. I know that horn, being a natural material, has its variances and one of my horn clad knives is no exception. The blemish around the pin is something that is present on a couple of my knives. I think it has to do with the many layered nature of horn, as Jack has suggested.

But I also have a rather major flaw in the pile side of my Oxhorn. I wouldn't call it a scratch and it most certainly will not buff out, it is rather deep. I would venture to say it is an inclusion that happens to run from the surface to the liner. It hasn't concerned me as I find that it lends character to the knife and is something that I have come to expect when acquiring horn. You can be assured that no two pieces will be alike.

Regardless, I will be interested to hear what the vendor has to say about it and if you decide to keep it and tinker with it, what your results end up being.

Here are a couple of pics I took a little while ago that show the inclusion near the bolster.

I apologize for my lack of contribution to the thread since Sunday. Snow/ice removal and medications/appointments seem to be eating up most of my discretionary time recently. I'll respond almost randomly to a post or two on the first 8 of 16 most recent pages.

No need to apologize, GT. I always appreciate your efforts and contributions, especially knowing how much time it has to take. I also know that this thread is moving a lot more briskly these days and I have a hard time keeping up as well.

Nice pic John

Lovely pile side shot, Jack! That news this morning was a very nice surprise to wake up to, looking forward to it.

When this year's Guardians knives are done and dusted, I might have to send myself on a quest to track down an old Lambsfoot or two

My collection of recent run lambsfoot knives (exclusively A. Wrights) has grown and will continue to grow, I suspect. However, I have a bit of a hankering to see about hunting down an old one myself here soon. Some of the old ones that you and the other folks post are always splendidly enticing.

 

[mitch4ging]

Beautiful horn on that one, Dennis, defects and all. I know that horn, being a natural material, has its variances and one of my horn clad knives is no exception. The blemish around the pin is something that is present on a couple of my knives. I think it has to do with the many layered nature of horn, as Jack has suggested.

But I also have a rather major flaw in the pile side of my Oxhorn. I wouldn't call it a scratch and it most certainly will not buff out, it is rather deep. I would venture to say it is an inclusion that happens to run from the surface to the liner. It hasn't concerned me as I find that it lends character to the knife and is something that I have come to expect when acquiring horn. You can be assured that no two pieces will be alike.

Regardless, I will be interested to hear what the vendor has to say about it and if you decide to keep it and tinker with it, what your results end up being.

Here are a couple of pics I took a little while ago that show the inclusion near the bolster.

Thanks for your input, Dylan!
It seems to be similar to yours, but less severe. It's such thin material that I don't want to approach it with a heavy hand, and I've already grown quite fond of it, so I'll probably leave as is. The matching covers are very attractive.
Had a lot of input here from a lot of folks, all of it good, and I do appreciate every bit of it! It's truly a great community!

And now for some knife content!

 

[Pàdruig]

Thanks for your input, Dylan!
It seems to be similar to yours, but less severe. It's such thin material that I don't want to approach it with a heavy hand, and I've already grown quite fond of it, so I'll probably leave as is. The matching covers are very attractive.
Had a lot of input here from a lot of folks, all of it good, and I do appreciate every bit of it! It's truly a great community!

And now for some knife content!
View attachment 1062567 View attachment 1062568 View attachment 1062569

I'd say you definitely got a good one. I really like how it "fades" to black on both the mark and pile side. A very attractive set of covers.

 

[mitch4ging]

I'd say you definitely got a good one. I really like how it "fades" to black on both the mark and pile side. A very attractive set of covers.

Thanks!
Looking at yours and others that's been posted, now that I'm paying attention, haven't seen an ugly one yet!

 

[Jack Black]

Have't received any further emails from you Jack, sent one to you a few minutes ago. Preston

Sorry for the tardy response Preston, when I'm not having to deal with a large volume of PMs and emails, I try and drag myself away from my computer for a few hours during the day. I answered your email within 5 minutes of getting home.

Everyone else:

If you have not received an email from me today, please ask yourself one of two questions:

1) Have you ever asked to be added to my email list?
2) Have you checked your Spam folder recently?

If you have sent me an email or a PM, I will answer it, you do not need to remind me in this thread.

 

[Jack Black]

Good morning, all! Great pics this morning!

Jack,
I did not receive an email either. I can re-send it if you need it again.

Thanks, Jack!

Can you please let me have your email address Dennis

Good morning, Guardians . . . well, really not, as we are dealing with finances this morning.
But, the 2018 ebony is in pocket, and RALF will help us through! Green tea again this morning.

Always nice to see RALF Jeff

Just received the TEW. Before cleaning and lubrication, I decided we needed a heat treat.
View attachment 1062465

Cool pic

Looking good John

Well, just from looking at the trailers, I KNOW I would like the first one better! Plan to watch both when I get a chance.

Lambsfoot content:
View attachment 1062516

Hope you enjoy them Vince

You poor soul, Vince! Here's what the Lambsfoot and I have to deal with this morning. Preston

That's bleak Preston! Great pic of your Lambsfoot though I've had something of a deluge myself today

I apologize for interruptinq the flow. I was hopinq to get an opinion. Feeling from the thread that a carbon steel blade is preferred has made me a bit self conscious. I watched a couple of YT Vids for testing. I cleaned the smaller pen blade, heated up some white vinegar, dipped part way and held over the cup. It did darken. I did nothing to the lamb foot blade. Am I correct in concluding that the blade is carbon? Thank you.
View attachment 1062530
View attachment 1062531

That must have been made not long before they switched to all-stainless

But I also have a rather major flaw in the pile side of my Oxhorn. I wouldn't call it a scratch and it most certainly will not buff out, it is rather deep. I would venture to say it is an inclusion that happens to run from the surface to the liner. It hasn't concerned me as I find that it lends character to the knife and is something that I have come to expect when acquiring horn. You can be assured that no two pieces will be alike.

Regardless, I will be interested to hear what the vendor has to say about it and if you decide to keep it and tinker with it, what your results end up being.

Here are a couple of pics I took a little while ago that show the inclusion near the bolster.

No need to apologize, GT. I always appreciate your efforts and contributions, especially knowing how much time it has to take. I also know that this thread is moving a lot more briskly these days and I have a hard time keeping up as well.



Lovely pile side shot, Jack! That news this morning was a very nice surprise to wake up to, looking forward to it.



My collection of recent run lambsfoot knives (exclusively A. Wrights) has grown and will continue to grow, I suspect. However, I have a bit of a hankering to see about hunting down an old one myself here soon. Some of the old ones that you and the other folks post are always splendidly enticing.

I've noticed that flaw before Dylan, was it always there? I think they refer to them as 'rorks' at the factory, at least that's the way it's pronounced. Unfortunately, it's not always possible to spot them in the horn before the final grind and polish.

Thank you my friend

 

[pjsjr]

That's bleak Preston! Great pic of your Lambsfoot though I've had something of a deluge myself today

Jack, a great thing about Colorado's weather is you don't have to wait long for a change

Apple for part of my lunch. Preston

 

[Jack Black]

Jack, a great thing about Colorado's weather is you don't have to wait long for a change

Apple for part of my lunch. Preston

It looks beautiful Preston

 

[Jathes]

My first lambsfoot was in the mailbox today. Very good snap on opening and closing. Needs a little touch up on the tip and it'll go in the pocket for tomorrow.

 

[Jack Black]

My first lambsfoot was in the mailbox today. Very good snap on opening and closing. Needs a little touch up on the tip and it'll go in the pocket for tomorrow.

Congratulations, and welcome to the Guardians

 

[Jack Black]

Night time here folks, and I'll be leaving early in the morning for my trip to Sheffield, so have a good day, and I'll see y'all when I get back home tomorrow

 

[Prester John]

Night time here folks, and I'll be leaving early in the morning for my trip to Sheffield, so have a good day, and I'll see y'all when I get back home tomorrow

Knife and pin are looking good! Hey, I noticed you're talking Texan: "y'all"!

 

[JohnDF]

Night time here folks, and I'll be leaving early in the morning for my trip to Sheffield, so have a good day, and I'll see y'all when I get back home tomorrow

We are all excited. Have a safe trip.

 

[mitch4ging]

My first lambsfoot was in the mailbox today. Very good snap on opening and closing. Needs a little touch up on the tip and it'll go in the pocket for tomorrow.

Congratulations! Looks like a keeper!

Knife and pin are looking good! Hey, I noticed you're talking Texan: "y'all"!

Dang Texans!

 

[Jathes]

Congratulations! Looks like a keeper!

The rosewood is nice. Couldn't pick it up on camera with late afternoon light.

 

[Jathes]

Congratulations, and welcome to the Guardians

Thanks

For map pin: Nearest town is Kewanee, Missouri.

 

[Cambertree]

Ah snow. I've read about the stuff.

Yeah, I’ve heard rumours of this ‘snow’ stuff as well. Personally, I remain sceptical about it.

I’m just returning from a road trip out West - showing around a visitor from the Carolinas (and getting some material for another thread). This thread moves quick, so apologies if I’ve missed acknowledging any comments.

It’s great to see all the new Guardians entering the Lambsfoot fold and contributing to this thread.

Welcome, friends!

Night time here folks, and I'll be leaving early in the morning for my trip to Sheffield, so have a good day, and I'll see y'all when I get back home tomorrow

Nice one mate, your hard work is appreciated as always. Safe travels to Sheffield.

Knife and pin are looking good! Hey, I noticed you're talking Texan: "y'all"!

Huh, yeah I also use that phrase on the Porch. Aussies tend to use the word ‘youse’ as a collective form of address, but I guess it might not be clearly understood here, so “y’all” works fine!

 

[Prester John]

Thanks

For map pin: Nearest town is Kewanee, Missouri.

I was thinking of asking! Welcome!

 

[Pàdruig]

I've noticed that flaw before Dylan, was it always there? I think they refer to them as 'rorks' at the factory, at least that's the way it's pronounced. Unfortunately, it's not always possible to spot them in the horn before the final grind and polish.

Yeah, the flaw has been present since I received it. It has never bothered me any, it doesn't seem structurally unstable, and I chalk it up to adding to the overall exceptional character of the knife.

Night time here folks, and I'll be leaving early in the morning for my trip to Sheffield, so have a good day, and I'll see y'all when I get back home tomorrow

Safe travels on the morrow, Jack. Love the pin, it pairs nicely with the Lambsfoot.

Yeah, I’ve heard rumours of this ‘snow’ stuff as well. Personally, I remain sceptical about it.

I’m just returning from a road trip out West - showing around a visitor from the Carolinas (and getting some material for another thread). This thread moves quick, so apologies if I’ve missed acknowledging any comments.

It’s great to see all the new Guardians entering the Lambsfoot fold and contributing to this thread.

Welcome, friends!



Nice one mate, your hard work is appreciated as always. Safe travels to Sheffield.



Huh, yeah I also use that phrase on the Porch. Aussies tend to use the word ‘youse’ as a collective form of address, but I guess it might not be clearly understood here, so “y’all” works fine!

Fantastic pictures, Chin! Your travels are enviable, my friend, I wonder how you might like our Pacific Northwest wilderness up here.