Quartermaster has made an enemy (page 28 onward)

Status
Not open for further replies.
craytab said:
Still no factory.

It's fine if you don't care. Just don't fill our plates with bull snot and expect us to eat it with you.
Click to expand...

Nobody is forcing you to come into my thread and endlessly argue with me. You did that on your own, and are making a huge deal out of it. I don't recall saying Quartermaster is absolutely 100% above the board, best company ever, if you dislike them you are an idiot. I recall saying they have done me right on customer service, and their knives are well made. I also fought against using inconclusive evidence as fact, because no reps from the company have gone and personally pooped on your lawns and kicked your dogs, so the seething hate is pretty unjustified. You can, in fact, dislike something without acting like it is almost as bad as Hitler, and take up a personal mission to leave no discussion of then not defecated upon. That's called an obsession, and it isn't healthy.
 
I started it, therefore I am the creator. You really want to argue semantics? Do you guys just have a hankering to argue, is that why you keep coming back?
 
dkb45 said:
Nobody is forcing you to come into my thread and endlessly argue with me. You did that on your own, and are making a huge deal out of it. I don't recall saying Quartermaster is absolutely 100% above the board, best company ever, if you dislike them you are an idiot. I recall saying they have done me right on customer service, and their knives are well made. I also fought against using inconclusive evidence as fact, because no reps from the company have gone and personally pooped on your lawns and kicked your dogs, so the seething hate is pretty unjustified. You can, in fact, dislike something without acting like it is almost as bad as Hitler, and take up a personal mission to leave no discussion of then not defecated upon. That's called an obsession, and it isn't healthy.
Click to expand...

Nice. Let's bring hitler into it. You have no clue how personally offensive comparing your crap company to hitler is to some folks.

You are the only person here who thinks the evidence isn't conclusive. Once you start a thread it isn't magically somehow yours. It is up for discussion. If you don't like people constantly pointing out how bad this company is you are welcome to not start threads on them or praise them at any chance you get.

Also, no factory. Funny how one of the biggest pieces of evidence there is against quarterdisaster is evidence you have stated you don't care about. Awful convenient don't you think :rolleyes:
 
dkb45 said:
I started it, therefore I am the creator. You really want to argue semantics? Do you guys just have a hankering to argue, is that why you keep coming back?
Click to expand...

Do you really not understand what a forum is? You don't own this thread. It is not yours. It belongs to the forum and ultimately its owner.
 
dkb45 said:
I started it, therefore I am the creator. You really want to argue semantics? Do you guys just have a hankering to argue, is that why you keep coming back?
Click to expand...

one of the rules of the forum is that the threads are not "your thread". but yes, you did create it. you have no ownership of it tho.



Nobody is forcing you to come into my thread and endlessly argue with me. You did that on your own, and are making a huge deal out of it. I don't recall saying Quartermaster is absolutely 100% above the board, best company ever, if you dislike them you are an idiot. I recall saying they have done me right on customer service, and their knives are well made. I also fought against using inconclusive evidence as fact, because no reps from the company have gone and personally pooped on your lawns and kicked your dogs, so the seething hate is pretty unjustified. You can, in fact, dislike something without acting like it is almost as bad as Hitler, and take up a personal mission to leave no discussion of then not defecated upon. That's called an obsession, and it isn't healthy.
Click to expand...
i dont like q5m$t3r because of the lies, false advertising, stealing of designs, and everything else thats so far been proven.
 
dkb45 said:
I don't know or care about the factory. I don't question the authenticity of everything, if it says it is something I am not self important enough to contradict that unless I need to. Knife is well made, price is good, I didn't care to look a gift horse in the mouth. I have had numerous US made knives that were all kinds of crap, and those are the ones I question.
Click to expand...

This from the guy who claimed to be a skeptic. LMAO
 
dkb45 said:
I started it, therefore I am the creator. You really want to argue semantics? Do you guys just have a hankering to argue, is that why you keep coming back?
Click to expand...

You would think a guy who had been here for a few years now would understand that people don't own threads. It's not semantics, which is another word whose actual meaning you seem to be unfamiliar with.
 
Simple, really. Every single time anyone posts in this thread, anyone who ever posted in the thread gets an email notice of that post unless they unsubscribed, stimulating them to see what else has been posted since they last looked. Coming here, we usually see you attacking anyone who criticizes Jared's company and brand, stimulating us to disagree with your endless advocacy for Jared. You are the primary reason this thread about Jared goes on.

Of course, any thread about Jared will get attention. He does his best to get attention and has received tons of it over the years, overwhelmingly negative here. Hope he believes that any publicly is "good" publicity, 'cause he has about run out of advocates - except for you and the shills.
 
Last edited:
OK I think I'm starting to get an idea of where DK is on this

dkb45 If you could please answer the following questions, I believe it will help us understand where you are coming from.

feel free to substitute the word "believe" with "suspect"
1. Do you believe Quarter master uses stolen designs to make their knives?
2. Do you believe that Quartermaster truly is a "Made in the USA" product?
3. Do you believe that there really is a Quartermaster factory/museum located somewhere in the USA?
4. Do you believe that Jared is essentially the owner of Quartermaster, or at least has a major stake in the company?
5. Instead of acquiring an "original" knife for an appropriate price. Would you rather purchase a clone/homage/copy/fake/counterfeit of that same knife at a small fraction of the "original makers" price?
6. If you answered yes to any of the above. Do you honestly even CARE? Or are you just happy with YOUR knives, and the way YOU have been treated by their customer service?
 
dkb45 said:
I don't know or care about the factory. I don't question the authenticity of everything, if it says it is something I am not self important enough to contradict that unless I need to. Knife is well made, price is good, I didn't care to look a gift horse in the mouth. I have had numerous US made knives that were all kinds of crap, and those are the ones I question.
Click to expand...

Sorry, but no. You've been yelling about circumstantial evidence this entire thread, do you really think anyone here is going to let you get away with just hand waving away an incredibly important and key piece of direct evidence? You are desperately trying to arrange facts to corroborate your opinion and that's become more and more obvious throughout the thread. Honestly, if you just like Quartermaster knives and don't particularly care that they lie about their country of origin and steal designs that's a valid position to hold. I imagine many, including myself, might judge you harshly for holding it, but it's certainly not a position we could argue with. The problem is that you've defended this company again and again, ignored evidence that didn't fit your narrative, bent over backwards to extend them any possible benefit of the doubt, far beyond what most would consider reasonable and, when this has been pointed out, made wild accusations of conspiracy theories and bad logic without producing a shred of evidence to support your own claims.
 
Just curious, had anybody done a Google maps look at the old address Quartermaster used? There isn't a very good view, but there is a pretty sizeable building there that looks like it could easily be a factory that houses equipment. The front area is also 3 stories.

I also found this, not sure what the connection is, but it's for a CNC company that mentions Quartermaster knives, but their link is dead. http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

As for the PO box, a business does not have to have a physical address. A PO box is bare minimum for requirements, and when I have dealt with customer service the PO box worked just fine.
 
dkb45 said:
Just curious, had anybody done a Google maps look at the old address Quartermaster used? There isn't a very good view, but there is a pretty sizeable building there that looks like it could easily be a factory that houses equipment. The front area is also 3 stories.

I also found this, not sure what the connection is, but it's for a CNC company that mentions Quartermaster knives, but their link is dead. http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

As for the PO box, a business does not have to have a physical address. A PO box is bare minimum for requirements, and when I have dealt with customer service the PO box worked just fine.
Click to expand...

[video=youtube;ubIpoPjBUds]https://www.youtube.com/watch?v=ubIpoPjBUds[/video]
 
dkb45 said:
Just curious, had anybody done a Google maps look at the old address Quartermaster used? There isn't a very good view, but there is a pretty sizeable building there that looks like it could easily be a factory that houses equipment. The front area is also 3 stories.

I also found this, not sure what the connection is, but it's for a CNC company that mentions Quartermaster knives, but their link is dead. http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

As for the PO box, a business does not have to have a physical address. A PO box is bare minimum for requirements, and when I have dealt with customer service the PO box worked just fine.
Click to expand...

That link is a company in china http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

What is this address you speak of? is it the Jackalope Ranch?
 
dkb45 said:
Just curious, had anybody done a Google maps look at the old address Quartermaster used? There isn't a very good view, but there is a pretty sizeable building there that looks like it could easily be a factory that houses equipment. The front area is also 3 stories.

I also found this, not sure what the connection is, but it's for a CNC company that mentions Quartermaster knives, but their link is dead. http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

As for the PO box, a business does not have to have a physical address. A PO box is bare minimum for requirements, and when I have dealt with customer service the PO box worked just fine.
Click to expand...

Are you talking about this address, 227 Turkey Dr, Dripping Springs, TX 78620? Because that shows up as a very large single family home. Zoned for residential.
 
Last edited:
If QM could prove they make everything, "even the boxes" in the USA, don't you think they would, to shut all this up on the largest knife forum in the USA? No, they won't, a friend contacted them through their website messaging. He got back only it's all lies and they don't have time to bother with it. Don't have time to bother with protecting their interests? Don't have time to put an end to it and shut all of us up. Human nature being what it is yes if they could prove it they would. Factor in the money aspect they are losing and it's just overwhelmingly obvious they can't prove anything at all. The video that was posted here shows a guy talking about QM and a view from a high window, anyone can see it was just an attempt to merely look like it was shot from some sort of factory. They show no equipment in the video, no pictures on the website of a factory. No pictures of a knife museum, no address to visit it, nothing. It's good enough for most of us to declare them a fraud.
 
dkb45 said:
Just curious, had anybody done a Google maps look at the old address Quartermaster used? There isn't a very good view, but there is a pretty sizeable building there that looks like it could easily be a factory that houses equipment. The front area is also 3 stories.

I also found this, not sure what the connection is, but it's for a CNC company that mentions Quartermaster knives, but their link is dead. http://www.cnctechnologies.in/9373/quarry-rats-quartermaster-location/

As for the PO box, a business does not have to have a physical address. A PO box is bare minimum for requirements, and when I have dealt with customer service the PO box worked just fine.
Click to expand...

You have to be kidding.......
 
zlcdp4.jpg
Are there no prisons ? And the union workhouses are they still in operation ?
 
Status
Not open for further replies.
Back
Top