Guardians of The Lambsfoot!

SteveC said:
Good morning Guardians !


Carrying Slick 🐑 today. Happy St. Patrick's day to those who celebrate it 👍

We have more snow forecasted for later today and then a big warm up later in the week.

View attachment 3135234
Click to expand...
Very slick indeed Steve 😊👍
Rufus1949 said:
View attachment 3135300
Click to expand...
Cool pic Bob 🍀😁👍
Campbellclanman said:
This is so like Jack! What a wonderful guy!
Well done to both you guys as both of you are extremely generous and deserving!
Click to expand...
Thank you Duncan, I hope your ears haven't been burning! 😁 I bumped into a neighbour who was heading over to York for a couple of days, and I was telling her about how much fun we had. Then today, York came up again, and so I mentioned you again 🙂👍
Rufus1949 said:
Thanks Steve. They even closed the schools, just because it was cold.🫤
Click to expand...
You do that kind of thing here sometimes too Bob! Never happened when I was a kid! 🤔
Rufus1949 said:
True, Jack gives freely with gifts and his knowledge of cutlery.
Click to expand...
You are all very kind to me 😊👍
DaveHS said:
I don’t have a green lamb for St. Patrick’s Day so here’s a favorite in a green environment. Cheers to all the Guardians. Stay safe out there. 🍀🥃🐑
View attachment 3135421
Click to expand...
Great pic Dave 😎👍
 
Finished up rehandling the 2 blade bex that Jack sent me in his giveaway. It is not pretty, my peening needs a lot of work. Had a hard time peening inside the rattail on the bolsters. Pins are a bit ragged, but, I didn't want to file down any closer as I didn't get the countersink very deep.
Master blade ended up low, so I had to cut in a small access notch.
RIMG4124.JPGRIMG4126.JPG
 
danno50 said:
Finished up rehandling the 2 blade bex that Jack sent me in his giveaway. It is not pretty, my peening needs a lot of work. Had a hard time peening inside the rattail on the bolsters. Pins are a bit ragged, but, I didn't want to file down any closer as I didn't get the countersink very deep.
Master blade ended up low, so I had to cut in a small access notch.
View attachment 3135793View attachment 3135794
Click to expand...

Nice job Danno ! 👍

Jakeywax31 said:
Had a good day. Past the hard part of my classes so it’s smooth sailing from here. Enjoyed some local cuisine for dinner. Not really local. It’s Taco Cabana. My favorite Tex Mex spot.

View attachment 3135912
Click to expand...


Glad to hear that things are going well 👍
 
echoscout said:
Afternoon Guardians! I've got some Irish blood so I guess I better have some green today.

View attachment 3135621
Click to expand...
Great pic David :) :thumbsup:
SteveC said:
Bonus pic 👍



View attachment 3135648
Click to expand...
That is a sweet Lamb Steve, in incredible condition :cool: :thumbsup:
danno50 said:
Finished up rehandling the 2 blade bex that Jack sent me in his giveaway. It is not pretty, my peening needs a lot of work. Had a hard time peening inside the rattail on the bolsters. Pins are a bit ragged, but, I didn't want to file down any closer as I didn't get the countersink very deep.
Master blade ended up low, so I had to cut in a small access notch.
View attachment 3135793View attachment 3135794
Click to expand...
Wow, fantastic work Dan, well done :cool: I watched a video recently where a guy used two screwdrivers when peening a rattail bolster. He laid the stem of each screwdriver in the groove of the bolster, put it against the stiddy, and hammered the top screwdriver, then reversed the knife to do the same again 👍
Jakeywax31 said:
Had a good day. Past the hard part of my classes so it’s smooth sailing from here. Enjoyed some local cuisine for dinner. Not really local. It’s Taco Cabana. My favorite Tex Mex spot.

View attachment 3135912
Click to expand...
Congratulations Paul, well done 😊 A well-deserved feast! 😋😁👍
 
Good morning Guardians, I hope everyone is well, and having a good week. My plans changed a bit yesterday, and I ended up meeting up with my pals in the nearby town of Huddersfield, rather than the village of Slaithwaite, 5 miles or so on the other side. We had a few pints, and some reasonable food, and I got to wake up in my own bed, which I appreciate more and more as I get older :D The weather was beautiful yesterday, and it looks nice today soon. I have to wait in for a delivery unfortunately, and reply to some work emails, but I'll be going out after that, even if it's only for a coffee. I have L'Ariete in my pocket :) Have a great day Guardians :thumbsup:

Cosimo De Bendetto Ramshorn Lambsfoot 21-1.jpg
 
Jack Black said:
Good morning Guardians, I hope everyone is well, and having a good week. My plans changed a bit yesterday, and I ended up meeting up with my pals in the nearby town of Huddersfield, rather than the village of Slaithwaite, 5 miles or so on the other side. We had a few pints, and some reasonable food, and I got to wake up in my own bed, which I appreciate more and more as I get older :D The weather was beautiful yesterday, and it looks nice today soon. I have to wait in for a delivery unfortunately, and reply to some work emails, but I'll be going out after that, even if it's only for a coffee. I have L'Ariete in my pocket :) Have a great day Guardians :thumbsup:

View attachment 3136006
Click to expand...
Glad your plans worked out Jack.

At my age, waking up the next day in any bed is a plus.🤣
 
Jack Black said:
Wow, fantastic work Dan, well done :cool: I watched a video recently where a guy used two screwdrivers when peening a rattail bolster. He laid the stem of each screwdriver in the groove of the bolster, put it against the stiddy, and hammered the top screwdriver, then reversed the knife to do the same again 👍
Click to expand...
Thanks Steve and Jack. I got a guy to build up the tang by welding and then ground it back down. The action is a little rough, but, it is useable.
This is still my favourite.
RIMG3764.JPG
 
Jack Black said:
That is a sweet Lamb Steve, in incredible condition :cool: :thumbsup:
Click to expand...

Thanks Jack, it's one of the gems of my collection !
Jack Black said:
Wow, fantastic work Dan, well done :cool: I watched a video recently where a guy used two screwdrivers when peening a rattail bolster. He laid the stem of each screwdriver in the groove of the bolster, put it against the stiddy, and hammered the top screwdriver, then reversed the knife to do the same again 👍
Click to expand...

I used this method to tighten up the joint of one of mine 👍


Jack Black said:
Good morning Guardians, I hope everyone is well, and having a good week. My plans changed a bit yesterday, and I ended up meeting up with my pals in the nearby town of Huddersfield, rather than the village of Slaithwaite, 5 miles or so on the other side. We had a few pints, and some reasonable food, and I got to wake up in my own bed, which I appreciate more and more as I get older :D The weather was beautiful yesterday, and it looks nice today soon. I have to wait in for a delivery unfortunately, and reply to some work emails, but I'll be going out after that, even if it's only for a coffee. I have L'Ariete in my pocket :) Have a great day Guardians :thumbsup:

View attachment 3136006
Click to expand...

Always nice to come home to your own bed, glad you had nice weather for your trip 👍

Rufus1949 said:
Going to the vampire to have some blood drawn.
My new primary doctor, that I saw yesterday, turned out to be a very funny and personable Egyptian lady.

Enjoy your day everyone.
View attachment 3136136
Click to expand...

Thanks buddy, you too !


danno50 said:
Thanks Steve and Jack. I got a guy to build up the tang by welding and then ground it back down. The action is a little rough, but, it is useable.
This is still my favourite.
View attachment 3136195
Click to expand...

I can see why 😍👍


echoscout said:
Mornin Guardians! Hope y'all have a pleasant day. Haven't carried this one in a long time 🤠

View attachment 3136213
Click to expand...

Very nice ! 👍
 
Rufus1949 said:
Glad your plans worked out Jack.

At my age, waking up the next day in any bed is a plus.🤣
Click to expand...
Thanks Bob 😊 I know what you mean my friend, it's a lot better than the alternative! 😱😉👍
Rufus1949 said:
Going to the vampire to have some blood drawn.
My new primary doctor, that I saw yesterday, turned out to be a very funny and personable Egyptian lady.

Enjoy your day everyone.
View attachment 3136136
Click to expand...
Good luck buddy, your doctor sounds great 🙂👍
echoscout said:
Mornin Guardians! Hope y'all have a pleasant day. Haven't carried this one in a long time 🤠

View attachment 3136213
Click to expand...
Nice! 😎👍
mac0731 said:
Charlie FC today
View attachment 3136234
Click to expand...
Smashing Mac, I have had my flat-cap on today, but if the weather continues like it is here at the moment, I will be ditching it soon 😉👍
 
SteveC said:
Good morning Guardians and happy hump day !

I hope everyone's week is going well.

Bagpipe Lamb today 👍



View attachment 3136253
Click to expand...
Great shot Steve 😎👍
SteveC said:
Thanks Jack, it's one of the gems of my collection !
Click to expand...
💎😎👍
SteveC said:
I used this method to tighten up the joint of one of mine 👍
Click to expand...
Nice work buddy 🙂 I recall hsving to peen joints regularly at one time, guess it was when I used to pick up knives from the market 👍
SteveC said:
Always nice to come home to your own bed, glad you had nice weather for your trip 👍



Thanks buddy, you too !




I can see why 😍👍




Very nice ! 👍
Click to expand...
Thanks a lot Steve, these past couple of days have been like going on vacation! 😃👍
 
You must log in or register to reply here.
Back
Top