Guardians of The Lambsfoot!

I bought it recently last 7-10 days... £32... not cheap but not expensive either. A little underpriced compared to some things I've splashed on.

The underblading is the only issue I have with this knife other wise its Mary Poppins. :)

Just a word of caution, that website is run by a dealer rather than Wright's themselves, and since they are not a dealer who support Bladeforums, mentioning them here violates the forum guidelines. So you might want to edit your post before there's a moderation issue :thumbsup:

Never thought I'd like anything as much as my 2019 but I this is sure growing on me :D
Got her cleaned up, next is putting an edge on her - as soon as I get the guts :rolleyes:
View attachment 1107469

Cool pic OG :thumbsup:
 
Last edited:
Well, I had a very exciting mail call yesterday and received a few knives but there was one in particular that had my interest more than the others. Unfortunately, it has been raining rather steady for several days now and my creek has risen close to 7 feet, putting it around 14ish feet (almost action stage for flooding). I am rather elevated compared to most folks so there isn't a lot of concern on my end but I am prepared to help others who might be less fortunate should the creek get much higher.

The rain is supposed to taper off today and I've already had enough of a break to hop outside to take some pictures. Please pardon the rather unsightly creek in the background. It is swollen, full of mud and all sorts of debris, and rather fast moving at this time.

Enough of that, let's reveal this beauty that ended up on my doorstep!


This knife easily is the most elegant and likely the most expensive slipjoint I own now. The Damascus, paired with exquisite file work and rather breathtaking Stag, make for an extraordinary knife and will be the prize of not only my lambsfoot collection but my slipjoint collection as a whole (have not tread the custom waters yet).

There is a fair amount of crud that still needs to be cleaned out of the pivot and there is quite a bit of compound in the lines and some of the grooves in the Stag but I couldn't wait to take the opportunity to snap some pictures. It truly is a fine example.

The Stag is not matched at all aside from the thickness but that is the sort of thing that I have come to expect from Sheffield and it holds no bother for me. It just means that I get to experience two knives instead of just one when it comes to aesthetics, right? ;)

The mark side is dusky, dark, and somewhat mysterious. Not a ton of texture but all sorts of depth, I think it mates well with the coolness of the Damascus.

7pB2qAi.jpg


mVnJwKP.jpg



The pile side is rather exquisite. Sporting the gnarly texture I so very much appreciate in Stag, it has color, grooves for days, and lots of rich depth. Truly fine.

Abwh4sH.jpg


9ew6rza.jpg



A pic of the file work.

UroakI9.jpg



Jack, this is an exceptional knife, I am so very pleased with it. Very nicely done on your part as well as Wrights. I hope this is a testament to great things to come from them, each knife I get has been better and better. This has been in the pocket today and I am eager to experience Damascus, I have never had such steel before.
FANTASTIC!!!!
 
Thanks for the link Preston, the gun club I used to belong to had premises about the size of my house and garden! :D

LOL! Very good :D I once saw a feller get chewing gum on a Harris Tweed jacket - nasty! :eek:



Same here buddy, the nearer I can get to standing a spoon up in it, the better :D :thumbsup:



Thanks Harvey, yes, a vest, usually called a waistcoat here, a vest is underwear, though you sometimes here it used in things like 'shooting vest' (had mine on today, even though I can no longer shoot) or 'fishing vest', but those are imported phrases really. Wes'kit is an old Yorkshire way of saying waistcoat, it always used to make me laugh as a kid when my dad said it :) :thumbsup:

Hoping some more of the Damascus knives are going to be landing today :) :thumbsup:
LOL, about the size of the shooting area, that couldn't have been real safe, Jack, unless you were shooting small caliber handguns. Chewing gum in anything is a mess!
Doh! Makes life harder when the reticle and adjustment are different systems. I use MOA because that is what I learned. Practice makes perfect :thumbsup:

...and beautiful knife of course :)
Thanks Darren, I have found some information about the use of milliradians and MOA. If I find I can't use the scope this way, I can send it back to Leupold and have them put in a different reticle...one in MOA.
Thank you, lads. And yes, Preston, I'm afraid I have some catching up to do... However, when I do see a bottle cap that I like, I glue a small magnet to the underside and then stick it on my fridge. I have a growing collection accumulating on there. :D
That is a very ingenious
Well, I had a very exciting mail call yesterday and received a few knives but there was one in particular that had my interest more than the others. Unfortunately, it has been raining rather steady for several days now and my creek has risen close to 7 feet, putting it around 14ish feet (almost action stage for flooding). I am rather elevated compared to most folks so there isn't a lot of concern on my end but I am prepared to help others who might be less fortunate should the creek get much higher.

The rain is supposed to taper off today and I've already had enough of a break to hop outside to take some pictures. Please pardon the rather unsightly creek in the background. It is swollen, full of mud and all sorts of debris, and rather fast moving at this time.

Enough of that, let's reveal this beauty that ended up on my doorstep!


This knife easily is the most elegant and likely the most expensive slipjoint I own now. The Damascus, paired with exquisite file work and rather breathtaking Stag, make for an extraordinary knife and will be the prize of not only my lambsfoot collection but my slipjoint collection as a whole (have not tread the custom waters yet).

There is a fair amount of crud that still needs to be cleaned out of the pivot and there is quite a bit of compound in the lines and some of the grooves in the Stag but I couldn't wait to take the opportunity to snap some pictures. It truly is a fine example.

The Stag is not matched at all aside from the thickness but that is the sort of thing that I have come to expect from Sheffield and it holds no bother for me. It just means that I get to experience two knives instead of just one when it comes to aesthetics, right? ;)

The mark side is dusky, dark, and somewhat mysterious. Not a ton of texture but all sorts of depth, I think it mates well with the coolness of the Damascus.

7pB2qAi.jpg


mVnJwKP.jpg



The pile side is rather exquisite. Sporting the gnarly texture I so very much appreciate in Stag, it has color, grooves for days, and lots of rich depth. Truly fine.

Abwh4sH.jpg


9ew6rza.jpg



A pic of the file work.

UroakI9.jpg



Jack, this is an exceptional knife, I am so very pleased with it. Very nicely done on your part as well as Wrights. I hope this is a testament to great things to come from them, each knife I get has been better and better. This has been in the pocket today and I am eager to experience Damascus, I have never had such steel before.
Congrats, Dylan, you got a very nice one! I also like the differing sides of the knife. Stay dry
FWIW - I'm sure you are aware of this but when I used to shoot, I found that if I breathed rhythmically and squeezed the trigger between breaths (before exhaling) that my accuracy improved. Not trying to be a butt-head, just trying to help.
OG
Thanks OG, I'm zeroed at 100 yards with less than a MOA group. It just the hold over that's causing the problem. Once I get that taken care of I should be GTG.
Again in stag!!!;):thumbsup:

n53mmq.jpg
Wonderful photo!
Never thought I'd like anything as much as my 2019 but this is sure growing on me :D
Got her cleaned up, next is putting an edge on her - as soon as I get the guts :rolleyes:
View attachment 1107469
Another wonderful photo of a wonderful knife.
 
LOL, about the size of the shooting area, that couldn't have been real safe, Jack, unless you were shooting small caliber handguns. Chewing gum in anything is a mess!

Handguns of all calibres! :eek: There was also .22 rifle a couple of nights a week, but I couldn't see the point of shooting rifle on a 30ft range. I never helped repair the back-stop, but they used to have to do it pretty regularly, heard the big magnum loads used to really tear it up :eek: I doubt very much that range is there now :rolleyes:
 
Well, I had a very exciting mail call yesterday and received a few knives but there was one in particular that had my interest more than the others. Unfortunately, it has been raining rather steady for several days now and my creek has risen close to 7 feet, putting it around 14ish feet (almost action stage for flooding). I am rather elevated compared to most folks so there isn't a lot of concern on my end but I am prepared to help others who might be less fortunate should the creek get much higher.

The rain is supposed to taper off today and I've already had enough of a break to hop outside to take some pictures. Please pardon the rather unsightly creek in the background. It is swollen, full of mud and all sorts of debris, and rather fast moving at this time.

Enough of that, let's reveal this beauty that ended up on my doorstep!


This knife easily is the most elegant and likely the most expensive slipjoint I own now. The Damascus, paired with exquisite file work and rather breathtaking Stag, make for an extraordinary knife and will be the prize of not only my lambsfoot collection but my slipjoint collection as a whole (have not tread the custom waters yet).

There is a fair amount of crud that still needs to be cleaned out of the pivot and there is quite a bit of compound in the lines and some of the grooves in the Stag but I couldn't wait to take the opportunity to snap some pictures. It truly is a fine example.

The Stag is not matched at all aside from the thickness but that is the sort of thing that I have come to expect from Sheffield and it holds no bother for me. It just means that I get to experience two knives instead of just one when it comes to aesthetics, right? ;)

The mark side is dusky, dark, and somewhat mysterious. Not a ton of texture but all sorts of depth, I think it mates well with the coolness of the Damascus.

7pB2qAi.jpg


mVnJwKP.jpg



The pile side is rather exquisite. Sporting the gnarly texture I so very much appreciate in Stag, it has color, grooves for days, and lots of rich depth. Truly fine.

Abwh4sH.jpg


9ew6rza.jpg



A pic of the file work.

UroakI9.jpg



Jack, this is an exceptional knife, I am so very pleased with it. Very nicely done on your part as well as Wrights. I hope this is a testament to great things to come from them, each knife I get has been better and better. This has been in the pocket today and I am eager to experience Damascus, I have never had such steel before.
That is very nice, Dylan. Congratulations on getting such a sweet Lamb. May you and your neighbors stay safe.

@Foddering Wow Dwight. How exciting. Enjoy your beautiful Lamb.
 
Wow! I was caught up when I left for work this morning, and come home to over 50 posts behind!
Black and strong. :thumbsup: :cool: :thumbsup:
And bitter! (just how I like my men) ;):p
They're built like that deliberately, but I guess not everyone appreciates them like that (if you do a search on the subject of 'underblading' you'll come across various discussions, though some folks confuse under-blading with blade-cant).
Hmm...I might be a little foggy on the difference between 'under-blading' and 'blade-cant'. :confused:
Is under-blading a sort of step down while retaining the proper angle, while blade-cant is tilted in relation to the handle?
Well, I had a very exciting mail call yesterday and received a few knives but there was one in particular that had my interest more than the others. Unfortunately, it has been raining rather steady for several days now and my creek has risen close to 7 feet, putting it around 14ish feet (almost action stage for flooding). I am rather elevated compared to most folks so there isn't a lot of concern on my end but I am prepared to help others who might be less fortunate should the creek get much higher.

The rain is supposed to taper off today and I've already had enough of a break to hop outside to take some pictures. Please pardon the rather unsightly creek in the background. It is swollen, full of mud and all sorts of debris, and rather fast moving at this time.

Enough of that, let's reveal this beauty that ended up on my doorstep!


This knife easily is the most elegant and likely the most expensive slipjoint I own now. The Damascus, paired with exquisite file work and rather breathtaking Stag, make for an extraordinary knife and will be the prize of not only my lambsfoot collection but my slipjoint collection as a whole (have not tread the custom waters yet).

There is a fair amount of crud that still needs to be cleaned out of the pivot and there is quite a bit of compound in the lines and some of the grooves in the Stag but I couldn't wait to take the opportunity to snap some pictures. It truly is a fine example.

The Stag is not matched at all aside from the thickness but that is the sort of thing that I have come to expect from Sheffield and it holds no bother for me. It just means that I get to experience two knives instead of just one when it comes to aesthetics, right? ;)

The mark side is dusky, dark, and somewhat mysterious. Not a ton of texture but all sorts of depth, I think it mates well with the coolness of the Damascus.

7pB2qAi.jpg


mVnJwKP.jpg



The pile side is rather exquisite. Sporting the gnarly texture I so very much appreciate in Stag, it has color, grooves for days, and lots of rich depth. Truly fine.

Abwh4sH.jpg


9ew6rza.jpg



A pic of the file work.

UroakI9.jpg



Jack, this is an exceptional knife, I am so very pleased with it. Very nicely done on your part as well as Wrights. I hope this is a testament to great things to come from them, each knife I get has been better and better. This has been in the pocket today and I am eager to experience Damascus, I have never had such steel before.
Congratulations! I prefer 'groovy' stag to the bumpy popcorn kind, so that looks fantastic to me. :):thumbsup:
 
Wow! I was caught up when I left for work this morning, and come home to over 50 posts behind!

And bitter! (just how I like my men) ;):p

Hmm...I might be a little foggy on the difference between 'under-blading' and 'blade-cant'. :confused:
Is under-blading a sort of step down while retaining the proper angle, while blade-cant is tilted in relation to the handle?

Congratulations! I prefer 'groovy' stag to the bumpy popcorn kind, so that looks fantastic to me. :):thumbsup:

LOL! :D :thumbsup:

Yes, exactly that Rachel :thumbsup:

I'd never really thought much about it until @JDWARE contacted me, I'd have probably thought of it as a flaw too. Jeff had done some historical research on the subject, and deliberately underblades his own knives. He asked me if I'd raise the issue with Stan Shaw, and Stan confirmed everything Jeff had said :thumbsup:

Just adding a (borrowed) pic, so folks can see what is being discussed :thumbsup:

IMG_5144.JPG
 
Last edited:
Just a word of caution, that website is run by a dealer rather than Wright's themselves, and since they are not a dealer who support Bladeforums, mentioning them here violates the forum guidelines. So you might want to edit your post before there's a moderation issue :thumbsup:



Cool pic OG :thumbsup:
Edited as suggested I thought not providing a link covered it.
 
Congratulations, Dwight! You picked a good one. Can't wait for the pics!
Thank you Vince.

Never thought I'd like anything as much as my 2019 but this is sure growing on me :D
Got her cleaned up, next is putting an edge on her - as soon as I get the guts :rolleyes:
View attachment 1107469
Lovely lovely lovely OG.

@Foddering Wow Dwight. How exciting. Enjoy your beautiful Lamb.
Thank you Harvey.

LOL! :D :thumbsup:

Yes, exactly that Rachel :thumbsup:

I'd never really thought much about it until @JDWARE contacted me, I'd have probably thought of it as a flaw too. Jeff had done some historical research on the subject, and deliberately underblades his own knives. He asked me if I'd raise the issue with Stan Shaw, and Stan confirmed everything Jeff had said :thumbsup:

Just adding a (borrowed) pic, so folks can see what is being discussed :thumbsup:

IMG_5144.JPG
Very interesting and educational Jack. I love learning something new. So I am assuming J.D.Ware was embarking on making lambsfoot knives?
 
Handguns of all calibres! :eek: There was also .22 rifle a couple of nights a week, but I couldn't see the point of shooting rifle on a 30ft range. I never helped repair the back-stop, but they used to have to do it pretty regularly, heard the big magnum loads used to really tear it up :eek: I doubt very much that range is there now :rolleyes:
How long ago was that, Jack?
I was just outside with Dutch and these Pronghorns were grazing about 150- 200 yards out on the rancher's land. Several of the does were curious and began to come toward us. I took these photos to document the event.
DSC_0278.JPG

DSC_0277.JPG
 
Back
Top