Lynn Thompson, Conquering the World, One Continent at a Time!

Status
Not open for further replies.
Lynn Thompson is the Man!
Men want to Be him.
Women want to be With him.

(I think some of you guys want to be With him too, as much as you think about his penis...)
BTW... Lynn Thompson wears a Live Rattlesnake as a Condom, so be careful.:D

Yep. more trolling. Most of your posts seem to be meant to get negative reactions. I guess you think that is fun. If you are trying to give people the impression that you're a putz, you have done a admirable job.
 
I do very much remember that. In fact, that was kind of the point. I took a shot at you. You questioned my integrity and essentially called me a liar, so I took a cheap shot at you. I was also reprimanded and chastised by mods and other members for it. I also apologized for said remarks.

This actually validates my point about LT. When said comments are made about him its all laughs and chuckles here with no one reprimanding.

A rationale dislike of a company or its members is fine. Many here have stated a rational point of view displaying such. I step in and comment when said hatred goes beyond rational and either misinforms or is just insulting.

And Ren, as for the Strider thing- LT did something brash and bold. He knew going in that he would make a lot of people mad when he did so. But I do know that he has received a lot more positive response then negative from folks from the average knife buyer to real "operators". Most of them did not know the details until LT put it out there, since the knife mags were busy calling Strider a Rock Star instead of what he is. LT put himself out there because he thought it was the right thing to do- asking himself the question, "if not me- then who? If not now- then when?"

Ren, your hatred seems actually fairly rational. I know that I will never change your mind, and I will not even try. Irrational to me is "I hate the company, so I'll make fun of the owner's weight. I hate the company, so I will question the owner's sexuality. I hate the company, so I will imply that the owner has a small penis." Now, really, can't you at least acknowledge that as a rational point itself?

I am not here to pick a fight with anyone. I just think that another side needs to be heard when the name calling and misinformation flies around here.


Dngrruss1 thanks for your reasoned response..The reason I dislike CS is probably from the other perspective the same reason you like CS. I am not into name calling ( unless in fun or jest with my friends...) but your points are valid. Saying LT has a small penis etc..is probably not appropriate but this is after all the internet so that goes without saying.

I think your rationalization of LTs strider thing on his website is a bit niave however. I wont re hash the whole issue again but just leave it to say that I believe that the truth always is brought to light for even the rocks will cry out..and also Mean people suck...you should get the drift..

Ren
 
DngrRuss1, I personally don't think that Lynn is just a dick. He does lots of good things. I do, however, think that at times he is a dick.
 
couple of myths the people always spout in CS threads : Lynn makes good knives. Cold Steel makes good knives. Cold Steel makes knives.

Fact: The make nothing. They farm out and then ninja market it.
?


Honestly, how many production knife company presidents MAKE their own knives? I am sure the majority of them, if not all, hire other people to design the knife, dig the ore, melt the steel, forge it into bars or blades, grind and polish, heat treat, etc etc etc. Using this logic, any production knife company that has employees who do this work instead of the founder or president is doing the same thing Cold Steel is doing- paying someone else to do the work.

Let's all have a group hug here. Some people here are in a massive first-place tie for the Special Olympics Running and Internet Arguing Relay Race. Chill out. We all have opinions, picking on someones favorite knife company is like making fun of a guy because of the wife he chose. Some guys like blondes, some redheads, some brunettes. Heck, some of you even like talking about other guy's peckers. Whatever floats your boat.
 
point well take , however , cold steal still doesn't manufacture a single knife do they ?
Do they even have a plant for manufacturing anything ?

That's the difference right there. And the myths I was referring to were comments I have read in various threads by the CS fanboys.
 
Honestly, how many production knife company presidents MAKE their own knives? I am sure the majority of them, if not all, hire other people to design the knife, dig the ore, melt the steel, forge it into bars or blades, grind and polish, heat treat, etc etc etc. Using this logic, any production knife company that has employees who do this work instead of the founder or president is doing the same thing Cold Steel is doing- paying someone else to do the work.
Wrong! Cold Steel is not a production knife company and the rest of the comments have no bearing supporting Cold Steel.
Cold Steel is a distributor. Being a distributor is not a bad thing, but is different than a manufacturing or even an assembly enterprise. Again, Cold Steel is a distributor of merchandise purchased from others and in no way similar to "production" or "manufacturing" concerns.
 
Frost cutlery is a distributor, Cold Steel is a distributor, Taylor cutlery is a distributor, United cutlery is a distributor.

Need I say more. :cool:
 
Wrong! Cold Steel is not a production knife company and the rest of the comments have no bearing supporting Cold Steel.
Cold Steel is a distributor. Being a distributor is not a bad thing, but is different than a manufacturing or even an assembly enterprise. Again, Cold Steel is a distributor of merchandise purchased from others and in no way similar to "production" or "manufacturing" concerns.

What is it they distribute?
A) Stuff that other companies manufacture, and Lynn Thompson looks at and says, hey, thats a nice knife, we will sell them?

or

B) Knives and products he pays other companies to manufacture based on his designs and manufacturing and quality specs?


If you answer A, then I am shocked at the number of companies worldwide that just so happen to make knives with "Cold Steel" stamped on them. What a coincidence. How easy it is for Cold Steel to sell products that are marked with a trademark he happens to own.


If you answer B, then how is it that a lot of other production knife companies "outsource" just like Cold Steel, (ex. knives manufactured to individual company standards but made in China, Taiwan, or Japan) aren't called knife distributors?

Is there really a difference between paying your employees to make knives to a certain spec, or paying another company to make knives to a certain spec?
 
What is it they distribute?
A) Stuff that other companies manufacture, and Lynn Thompson looks at and says, hey, thats a nice knife, we will sell them?

or

B) Knives and products he pays other companies to manufacture based on his designs and manufacturing and quality specs?


If you answer A, then I am shocked at the number of companies worldwide that just so happen to make knives with "Cold Steel" stamped on them. What a coincidence. How easy it is for Cold Steel to sell products that are marked with a trademark he happens to own.


If you answer B, then how is it that a lot of other production knife companies "outsource" just like Cold Steel, (ex. knives manufactured to individual company standards but made in China, Taiwan, or Japan) aren't called knife distributors?

Is there really a difference between paying your employees to make knives to a certain spec, or paying another company to make knives to a certain spec?

A lot of other knife companies "outsource" and yes they are distributors unless the outsourcing is a part of their business and another part is "production" then they are distributing outsourced and self produced merchandise.

Again, another version of the statement/argument that holds no water. There is an immense difference between hiring, training, managing, paying wages and benefits, scheduling work for, and providing material and location for a workforce compared to those that purchase from you.
Manufacturing your own merch is far different than providing specs to an agent and placing a order. A good example of this is the US toy industry and it's "outsourcing" problems.

I wonder how often a Rep of Cold Steel looks at an item and places a "private label" order. That would be a variation of choice "A" I believe.
 
I wonder how often a Rep of Cold Steel looks at an item and places a "private label" order. That would be a variation of choice "A" I believe.

Okay, I'll agree that could happen. .......... So, where are all the same products then, marked no doubt with something other than Cold Steel?
 
Here is my opinion... Not that anyone gives a damn.
Cold Steel has Awesome knives, tomahawks, axes, clubs, shamboks, Baseball-bats, Battlemaces...etc. etc. MOST of there products are super tough, fully functional, battle ready and just plain cool... not to mention affordable.
Ontario Knives has good knives, awesome machetes... etc.
Benchmade has great knives.
Spyderco has a few good knives.
Strider Knives... Over rated, way too expensive.
Kershaw has a couple of nice designs.
Emerson has very nice knives but a little too pricey.
Buck knives are classics just like case... but a little too old-man for me.

Almost every one of these companies outsource.
Soon Everything will be made in China and eventually, we will all be their slaves.
Say what you will about Lynn Thompson, but I've got respect for the guy.
I Love his Proof Videos... I don't think they are over the top, I think they are just right. At least he puts his products on the line and show what they can do. I wish every company made proof videos.
Every knife company (much like car companies) claims that they are the best. To believe that just one is the best and all others are crap, especially based on the actions of one individual, is idiotic at best.
If one company made The Best Knives at The Best Prices, hands down... then they would instantly put All other knife companies out of business.
I personally would rather buy a knife from someone who Hunts big game, practices martial arts, etc. His Company tests their products to the limit and beyond and they show exactly what can be expected from their products via Free Video.
I don't care about his personal actions against Mick Striker.
Its all about what I want to buy and what I want to carry in my pocket, based on my personal standards of toughness and cost to my bank account... nothing more.
Call me a Troll.
 
Okay, I'll agree that could happen. .......... So, where are all the same products then, marked no doubt with something other than Cold Steel?

Probably out in the market being called Cold Steel forgeries or were already in the market and called designs "stolen" by Cold Steel. If not, maybe no one else felt the design prototype worth buying in quantity.
 
Probably out in the market being called Cold Steel forgeries or were already in the market and called designs "stolen" by Cold Steel. If not, maybe no one else felt the design prototype worth buying in quantity.

Okay, lets speculate some more. Cold Steel is buying products from a company who is illegally using their trademarked name. Somehow, I do not think this is too probable.

Grasping at straws scenario #2- Cold Steel is buying from a company that can't sell any other products and is therefore headed for oblivion, making any future purchases impossible. Hmmm.... again, I don't think so. Many of their products have been around for years.

Do you have any other wildly improbable fantasies that you can share with us? I have fun shooting them down.

Maybe, just maybe, your personal view of Cold Steel doesn't jive with reality?
 
If Lynn is such a great disigner....
Why does all of his rubber handled knives have massive stress risers?
Why are all the locking systems he disigns POS?
Why are his only good locking systems glorifyed lockbacks?
Why are almost every disign of his riped off other makers?
 
If Lynn is such a great disigner....
Why does all of his rubber handled knives have massive stress risers?
Why are all the locking systems he disigns POS?
Why are his only good locking systems glorifyed lockbacks?
Why are almost every disign of his riped off other makers?

I am sorry, I do not understand your language.
 
Status
Not open for further replies.
Back
Top