- Joined
- Feb 27, 2010
- Messages
- 1,785
oooops, wrong thread.
I thought this was the Ford vs Chevy thread.
Goodgawd!!
It was not intended by me when I posted.
The BladeForums.com 2024 Traditional Knife is available! Price is $250 ea (shipped within CONUS).
Order here: https://www.bladeforums.com/help/2024-traditional/
oooops, wrong thread.
I thought this was the Ford vs Chevy thread.
Goodgawd!!
timberweasel,
Both knives are easy enough to break down if needed, but you obviously need a tool for the strider if the pivot is tightened. Some times the pivot screw will come free if there is no lock tite, but most of the time not the case.
There is no doubt that the fit on striders is very loose. You can take your sebenza and know every time to put it together it will be the same and function properly.
With a strider. The pivot and handle screws almost always need adjusting to operate smooth. Spinning the pivot will also make it change the centering and lock up as well.
I am a wizard with assembling and tweaking knives and it is just a fact. A rough figure on how many would be a between 12-18 total. Every single one was improved by tweaking.
They can both be taken down assembled all day long. But with the strider, things are just not tight.
Out of box there was something wrong and off that needed to be fixed on every one that I have owned or worked on. From a rounded tip from grinding, blade stop/thumb stud falling out, uncentered blade, blade play etc. All were fixed promptly but still.
The fact of the matter is. The strider does have a thicker blade and a choil which the CRK does not. Those are winners for many people.
And even with a small QC issue the SNG is such a great work knife that none of that matters to me.
But really different you know. Like I compared my strider to my Jeep 4x4. And my CRK reminds me of my AWD Audi except a CRK is not expensive to fix!
Yes, this is the problem with these topics.....
Opinions are wonderful, and fun to even argue, however when they are stated as fact, things go sideways fast....
(...)But really different you know. Like I compared my strider to my Jeep 4x4. And my CRK reminds me of my AWD Audi except a CRK is not expensive to fix!
There's the rub; I hear this analogy often. So why do you think that Striders and CRKs constantly compared to each other then, if it's apples to oranges? What knives are more suitable competitors to the Strider offerings?![]()
There's the rub; I hear this analogy often. So why do you think that Striders and CRKs constantly compared to each other then, if it's apples to oranges? What knives are more suitable competitors to the Strider offerings?![]()
You summed it up perfectly. This is exactly how i see the two knives.
Well I started this thread not as to which knife is better, but about cost/materials/workmanship. I own both and think both are great knives. I just think one has a much higher profit margin then the other. That is it. Saying one is clearly better, is a flat out personal statement and only based on your opinion.
That TUFF is like an ugly girlfriend that really knows what she is doing and works hard at it but man is she rough on the eyes. Did you have to learn to love her?
The problem is sometimes you need to improvise and if I am on a backcountry hunt and need to baton through a pelvis and dont have my fixed blade, I really think i would rather have a strider SMF. I dont even think the Sabenza was designed for this kind of use. I really like the Sabenza, but I try and keep it to where it functions its best. If it is christmas morning, you can bet i am using my sabenza to open the kid's presents as opposed to my strider. Its a very classy knife and classy knives dont belong in the wilderness, IMO.
Are there any hard use videos out there on the Sabenza? I genuinely ask because i have not seen any.
The fact that you can "baton through a pelvis" doesn't make your strider a better folding knife. If anything it means that you are a moron who can't plan ahead and bring the right tool for the job. People who do this baffle me to no end. It's like using screwdriver to hammer nails into a board. Why?
Don't understand why anyone would even want to baton a 3.5" to 4" folder through a pelvis in the 1st place.
Don't they make bone saws for that, or hatchets?
Or at worst a 5" fixed blade if they wanted to use a knife for that.
Personally I wouldn't use any folder for that type of work.
It's akin to saying "my hammer is better than your hammer because mine can chop down a tree better than yours can!"
Since when was that in the job description?
Start watching at about 2 minutes 30 seconds...
[video=youtube;xp4C4OiD54Y]https://www.youtube.com/watch?v=xp4C4OiD54Y[/video]
![]()
Well played, stabby, well played
![]()
Yeah you pack a hatchet or these other tools onto your back 5-10 miles on a back country hunt. Obviously, you have never done that.
You can find just about anything on the internet.![]()
I used to hunt....never forgot my fixed blade, a Buck skinner. I also carried a 110 on my belt. If I forgot the skinner, it would be just as stupid as forgetting my ammo. My grandpa used to carry a camp hatchet.....used to have a leather washer handle. We always made sure we had the right tools and equipment befor we left.
So you just carry a Strider.....OK.
I used to hunt....never forgot my fixed blade, a Buck skinner. I also carried a 110 on my belt. If I forgot the skinner, it would be just as stupid as forgetting my ammo. My grandpa used to carry a camp hatchet.....used to have a leather washer handle. We always made sure we had the right tools and equipment befor we left.
So you just carry a Strider.....OK.