What's going on in your shop? Show us whats going on, and talk a bit about your work!

[Hengelo_77]

sorry for the dubble message, internet reacted strangly here

 

[Hengelo_77]

well solved Pablo

This one is comming together quite well I think

 

[HDCutlery]

drop point just finished up as first full freehand. Hate to say it but this one was easier than using my old jig

Sent from my SM-G900R4 using Tapatalk

 

[PEU]

Customer came to pick up a small kitchen cleaver, I saw him handling it with "too much" care, so I asked, do you want to really use your new knife?

I went to my workbench, picked up a small piece of 3/16" aluminum rod and using a mallet hammered it until it splitted (if you pay attention on the last blow you will see the other half flying away)

I guess he is now confident of his new tool

[video=youtube;mQRuQ9kTu0E]https://www.youtube.com/watch?v=mQRuQ9kTu0E[/video]


Pablo

 

[HDCutlery]

Drop point hunter just finished up as my first full freehand. Very pleased and much easier than using a jig and much cleaner results.

Sent from my SM-G900R4 using Tapatalk

 

[HDCutlery]

First full on freehand on this drop point. So much cleaner results than using a jig

 

[HDCutlery]

Very odd that posted 3 times.. Got an error the first 2 attempts

Sent from my SM-G900R4 using Tapatalk

 

[Daniel Fairly Knives]

Lots of folders in the shop... here's my latest, a one off 4" blade Kwaiken.

I cut the lockbar on this one with an inexpensive abrasive wheel on the mill. It was my first time to do so and went nicely. I used a Forney wheel at 11OO rpm then finished the cut with a combo of hacksaw, band saw then cleaned up with jewelers files and sandpaper.


Cat scratch finish!






Customized AKS pivot... carved, polished, wire wheeled and heat colored.

 

[probrwr]

Getting the shop set up a little more with a $90 score at a yard sale today.

Sent from my SM-G920P using Tapatalk

 

[jwesthurl]

Lots of folders in the shop... here's my latest, a one off 4" blade Kwaiken.

I cut the lockbar on this one with an inexpensive abrasive wheel on the mill. It was my first time to do so and went nicely. I used a Forney wheel at 11OO rpm then finished the cut with a combo of hacksaw, band saw then cleaned up with jewelers files and sandpaper.


Cat scratch finish!






Customized AKS pivot... carved, polished, wire wheeled and heat colored.

WOW Daniel. I love this knife! Fantastic design and execution.

 

[Daniel Rohde]

Been pretty busy lately. I haven't had a lot of shop time but I have been working on a puukko. These are pretty new for me but I'm definitely enjoying it I have also been finding Instagram easy for sharing progress pictures. Here are a few

 

[A.McPherson]

Pretty slick Daniel! Diggin the copper as always!


Sent from my iPhone using Tapatalk

 

[HDCutlery]

Very sharp little parer with Geenberg's Kingwood and Redwood Burl, with brass/micarta spacer. O-1 brought up to 800grit and buffed, potatoes beware.

Sent from my SM-G900R4 using Tapatalk

 

[Hengelo_77]

Tried to epoxy a thin ironwood bolster/guard in place....
***********!!!!
And back to square one...

 

[Matt Rochester]

I think it's time to start putting some handles on!

 

[12345678910]

Been pretty busy lately. I haven't had a lot of shop time but I have been working on a puukko. These are pretty new for me but I'm definitely enjoying it I have also been finding Instagram easy for sharing progress pictures. Here are a few

I like that.

 

[Kevin McGovern]

Just finished this one.

The user wanted his initials.

 

[rustyrazor]

couple more out the door... that grey bone has been in a drawer for over 10 years. not sure what i was waiting for

 

[PEU]

Next time don't do the hole along the wood grain, turn it 90 degrees.

Tried to epoxy a thin ironwood bolster/guard in place....
***********!!!!
And back to square one...

Pablo

 

[PEU]

Some large carbon steel kitchen knives on the workbench (Bohler K720/O2)

Pablo